[PATCH 1/2] ARM: dts: imx6qdl: Use nvmem interface to get fuse data

From: Anson Huang
Date: Wed May 13 2020 - 21:18:25 EST


Although ocotp clock is always ON for i.MX6QDL, OCOTP can be
accessed directly, but since i.MX6QDL nvmem interface is supported,
and fsl,tempmon-data is deprecated, use it instead of getting fuse
data by reading ocotp directly, this makes all i.MX6 SoCs aligned.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
arch/arm/boot/dts/imx6qdl.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 98da446..1763c2b 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -74,7 +74,8 @@
interrupt-parent = <&gpc>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
#thermal-sensor-cells = <0>;
};
@@ -1171,6 +1172,14 @@
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
};

tzasc@21d0000 { /* TZASC1 */
--
2.7.4