[PATCH] net: stmmac: fix num_por initialization

[Vinod Koul]

Driver missed initializing num_por which is por values that driver
configures to hardware. In order to get this values, add a new structure
ethqos_emac_driver_data which holds por and num_por values and populate
that in driver probe.

Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@xxxxxxxxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index e0a5fe83d8e0..bfc4a92f1d92 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -75,6 +75,11 @@ struct ethqos_emac_por {
 	unsigned int value;
 };
 
+struct ethqos_emac_driver_data {
+	const struct ethqos_emac_por *por;
+	unsigned int num_por;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
@@ -171,6 +176,11 @@ static const struct ethqos_emac_por emac_v2_3_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG2,	.value = 0x00002060 },
 };
 
+static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
+	.por = emac_v2_3_0_por,
+	.num_por = ARRAY_SIZE(emac_v2_3_0_por),
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	unsigned int val;
@@ -442,6 +452,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
+	const struct ethqos_emac_driver_data *data;
 	struct qcom_ethqos *ethqos;
 	struct resource *res;
 	int ret;
@@ -471,7 +482,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		goto err_mem;
 	}
 
-	ethqos->por = of_device_get_match_data(&pdev->dev);
+	data = of_device_get_match_data(&pdev->dev);
+	ethqos->por = data->por;
+	ethqos->num_por = data->num_por;
 
 	ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_clk)) {
@@ -526,7 +539,7 @@ static int qcom_ethqos_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_ethqos_match[] = {
-	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_por},
+	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_ethqos_match);
-- 
2.25.4