[PATCH v2 3/8] iio: at91_adc: pass ref to IIO device via param for int function

[Alexandru Ardelean]

Since there will be some changes to how iio_priv_to_dev() is implemented,
it could be that the helper becomes a bit slower, as it will be hidden away
in the IIO core.

For this driver, the IIO device can be passed directly as a parameter to
the at91_ts_sample() function, thus making it immune to the change of
iio_priv_to_dev().
The function gets called in an interrupt context.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
 drivers/iio/adc/at91_adc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0368b6dc6d60..5999defe47cd 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -287,13 +287,12 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
 	}
 }
 
-static int at91_ts_sample(struct at91_adc_state *st)
+static int at91_ts_sample(struct iio_dev *idev, struct at91_adc_state *st)
 {
 	unsigned int xscale, yscale, reg, z1, z2;
 	unsigned int x, y, pres, xpos, ypos;
 	unsigned int rxp = 1;
 	unsigned int factor = 1000;
-	struct iio_dev *idev = iio_priv_to_dev(st);
 
 	unsigned int xyz_mask_bits = st->res;
 	unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
@@ -449,7 +448,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
 
 		if (status & AT91_ADC_ISR_PENS) {
 			/* validate data by pen contact */
-			at91_ts_sample(st);
+			at91_ts_sample(idev, st);
 		} else {
 			/* triggered by event that is no pen contact, just read
 			 * them to clean the interrupt and discard all.
-- 
2.17.1