[PATCH][next] net: dsa: felix: fix incorrect clamp calculation for burst

[Colin King]

From: Colin Ian King <colin.king@xxxxxxxxxxxxx>

Currently burst is clamping on rate and not burst, the assignment
of burst from the clamping discards the previous assignment of burst.
This looks like a cut-n-paste error from the previous clamping
calculation on ramp.  Fix this by replacing ramp with burst.

Addresses-Coverity: ("Unused value")
Fixes: 0fbabf875d18 ("net: dsa: felix: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index df4498c0e864..85e34d85cc51 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1360,7 +1360,7 @@ static int vsc9959_qos_port_cbs_set(struct dsa_switch *ds, int port,
 	/* Burst unit is 4kB */
 	burst = DIV_ROUND_UP(cbs_qopt->hicredit, 4096);
 	/* Avoid using zero burst size */
-	burst = clamp_t(u32, rate, 1, GENMASK(5, 0));
+	burst = clamp_t(u32, burst, 1, GENMASK(5, 0));
 	ocelot_write_gix(ocelot,
 			 QSYS_CIR_CFG_CIR_RATE(rate) |
 			 QSYS_CIR_CFG_CIR_BURST(burst),
-- 
2.25.1