[RFC PATCH 6/6] arm64: dts: imx8mq-librem5-devkit: Enable MIPI DSI panel

[Guido GÃnther]

Enable MIPI LCD panel output by adding nodes for the NWL DSI host
controller, the mux-input-bridge, the Rocktech panel and the eLCDIF
display controller.

Signed-off-by: Guido GÃnther <agx@xxxxxxxxxxx>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 7fc31c71a626..d98f9b8dede8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -841,6 +841,87 @@ MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x19 /* WWAN_RESET */
 	};
 };
 
+&lcdif {
+	status = "okay";
+
+	port@0 {
+		lcdif_dpi_out: endpoint {
+			remote-endpoint = <&dpi_mux_from_lcdif>;
+		};
+	};
+};
+
+&iomuxc_gpr {
+	mipi_mux: mipi-mux {
+		compatible = "mux-input-bridge";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dpi_mux_from_lcdif: endpoint {
+					remote-endpoint = <&lcdif_dpi_out>;
+				};
+			};
+
+			port@1 { /* dcss */
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				dpi_mux_out: endpoint {
+					remote-endpoint = <&nwl_dpi_in>;
+				};
+
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	status = "okay";
+	panel@0 {
+		compatible = "rocktech,jh057n00900";
+		reg = <0>;
+		backlight = <&backlight_dsi>;
+		reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_2v8_p>;
+		iovcc-supply = <&reg_1v8_p>;
+		port@0 {
+			panel_in: endpoint {
+				remote-endpoint = <&nwl_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			nwl_dpi_in: endpoint {
+				remote-endpoint = <&dpi_mux_out>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			nwl_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &pgc_gpu {
 	power-supply = <&buck3_reg>;
 };
-- 
2.26.1