Re: [PATCH V1 1/2] mmc: sdhci: Introduce new quirk to use reserved timeout

From: Ulf Hansson
Date: Mon May 18 2020 - 05:39:46 EST


On Wed, 6 May 2020 at 15:53, Sarthak Garg <sartgarg@xxxxxxxxxxxxxx> wrote:
>
> Introduce a new quirk for letting vendor drivers to use reserved
> timeout value (0xF) in timeout control register.
>
> Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
> Signed-off-by: Sarthak Garg <sartgarg@xxxxxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.c | 3 ++-
> drivers/mmc/host/sdhci.h | 5 +++++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 1bb6b67..07528a9 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -967,7 +967,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
> }
>
> if (count >= 0xF) {
> - if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
> + if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) ||
> + !(host->quirks2 & SDHCI_QUIRK2_USE_RESERVED_MAX_TIMEOUT))

I don't quite get how this can make your variant use 0xF rather than 0xE?

To me it looks like an updated conditional check to print a debug message, no?

> DBG("Too large timeout 0x%x requested for CMD%d!\n",
> count, cmd->opcode);
> count = 0xE;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 8d2a096..02f8779 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -476,6 +476,11 @@ struct sdhci_host {
> * block count.
> */
> #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
> +/*
> + * Some controllers define the usage of 0xF in data timeout counter
> + * register (0x2E) which is actually a reserved bit as per specification.
> + */
> +#define SDHCI_QUIRK2_USE_RESERVED_MAX_TIMEOUT (1<<19)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
> --
> 2.7.4
>

Kind regards
Uffe