Re: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema

[Rob Herring]

On Sun, May 17, 2020 at 1:34 PM Lubomir Rintel <lkundrak@xxxxx> wrote:
>
> On Fri, Mar 27, 2020 at 01:55:20PM -0600, Rob Herring wrote:
> > On Tue, Mar 17, 2020 at 10:39:22AM +0100, Lubomir Rintel wrote:
> > > A straightforward conversion of the ehci-mv binding to DT schema format
> > > using json-schema.
> > >
> > > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> > > ---
> > >  .../devicetree/bindings/usb/ehci-mv.txt       | 23 -------
> > >  .../bindings/usb/marvell,pxau2o-ehci.yaml     | 60 +++++++++++++++++++
> > >  2 files changed, 60 insertions(+), 23 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt
> > >  create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > > deleted file mode 100644
> > > index 335589895763e..0000000000000
> > > --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > > +++ /dev/null
> > > @@ -1,23 +0,0 @@
> > > -* Marvell PXA/MMP EHCI controller.
> > > -
> > > -Required properties:
> > > -
> > > -- compatible: must be "marvell,pxau2o-ehci"
> > > -- reg: physical base addresses of the controller and length of memory mapped region
> > > -- interrupts: one EHCI controller interrupt should be described here
> > > -- clocks: phandle list of usb clocks
> > > -- clock-names: should be "USBCLK"
> > > -- phys: phandle for the PHY device
> > > -- phy-names: should be "usb"
> > > -
> > > -Example:
> > > -
> > > -   ehci0: usb-ehci@d4208000 {
> > > -           compatible = "marvell,pxau2o-ehci";
> > > -           reg = <0xd4208000 0x200>;
> > > -           interrupts = <44>;
> > > -           clocks = <&soc_clocks MMP2_CLK_USB>;
> > > -           clock-names = "USBCLK";
> > > -           phys = <&usb_otg_phy>;
> > > -           phy-names = "usb";
> > > -   };
> > > diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > > new file mode 100644
> > > index 0000000000000..189025ef1e92e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > > @@ -0,0 +1,60 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> >
> > Same license comment.
>
> I wrote that binding document and chose that license.

Okay, but please make it GPL-2.0-only instead of or-later. If everyone
was attentive to licensing picking their own variations would be fine,
but they aren't and just copy-n-paste. So there's 2 choices
GPL-2.0-only (for converted bindings) or (GPL-2.0-only OR
BSD-2-Clause) for new or re-licensed bindings.

Rob