[PATCH 0/3] Add initial support for MikroTik RB3011

[Jonathan McDowell]

This patches do some prep (device tree vendor addition, missing ethernet
definitions for IPQ8064 dts) and then add an initial device tree for the
MikroTik RB3011 1U router, which is an IPQ8064 device with 1G RAM. They
are sufficient to boot with an initrd, the serial console and the first
5 switch ports fully functional (the second bank of 5 require some extra
patches to the QCA8K driver which will follow later). The bootloader NOR
is also supported, but the 128MB NAND is not yet enabled.

Jonathan McDowell (3):
  dt-bindings: vendor-prefixes: Add MikroTik
  ARM: dts: qcom: add ethernet definitions to ipq8064
  ARM: dts: qcom: Add MikroTik RB3011

 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts     | 308 ++++++++++++++++++
 arch/arm/boot/dts/qcom-ipq8064.dtsi           | 108 ++++++
 4 files changed, 419 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts

-- 
2.20.1