[PATCH] dt-bindings: input: touchscreen: edt-ft5x06: change reg property

[Johan Jonker]

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
touchscreen@3e: reg:0:0: 56 was expected

The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
was shipped with different addresses then the binding currently allows.
Change the reg property that any address will pass.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
edt-ft5x06.yaml

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 383d64a91..baa8e8f7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -42,7 +42,7 @@ properties:
       - focaltech,ft6236
 
   reg:
-    const: 0x38
+    maxItems: 1
 
   interrupts:
     maxItems: 1
-- 
2.11.0