[PATCH v7 0/5] mainline Protonic boards

From: Oleksij Rempel
Date: Wed May 20 2020 - 05:29:54 EST


changes v7:
- VT7: reorder node alphabetically
- VT7: rename "reg_12v_bl: regulator-bl-12v" to "reg_bl_12v0: regulator-bl-12v0"
- VT7: remove panel and TS nodes. This drivers are currently not
mainline.
- prti6q.dtsi: move reg_1v8 to prti6q.dts
- prti6q.dtsi: remove pinctrl from the can1 node. It is done on almost
every board file.

changes v6:
- move fsl.yaml changes to separate patch
- remove partitions, they are provided by the bootloader
- update flash compatible
- rename can3 to can
- fix fsl,mode
- fix interrupt in the wlan node on PRTI6Q

changes v5:
- PRTI6Q: remove status from the pwm-backlight node
- drop the vendor-prefixes patch, it is already taken by Rob
- add Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

changes v4:
- VT7: fix typo

changes v3:
- move compatible to the start of node
- move status to the end
- use generic names in compatible
- refactor dts/dtsi
- use alphabet order for pinctrl and phandels
- remove unused or currently not supported nodes

changes v2:
- squash PRTI6Q patches

Oleksij Rempel (5):
ARM: dts: add Protonic PRTI6Q board
ARM: dts: add Protonic WD2 board
ARM: dts: add Protonic VT7 board
ARM: dts: add Protonic RVT board
dt-bindings: arm: fsl: add different Protonic boards

.../devicetree/bindings/arm/fsl.yaml | 4 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx6dl-prtrvt.dts | 182 ++++++
arch/arm/boot/dts/imx6dl-prtvt7.dts | 472 ++++++++++++++++
arch/arm/boot/dts/imx6q-prti6q.dts | 529 ++++++++++++++++++
arch/arm/boot/dts/imx6q-prtwd2.dts | 188 +++++++
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 174 ++++++
7 files changed, 1553 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts
create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi

--
2.26.2