RE: [PATCH V3] dt-bindings: thermal: Convert i.MX to json-schema

[Aisheng Dong]

> From: Anson Huang <Anson.Huang@xxxxxxx>
> Sent: Wednesday, May 20, 2020 4:17 PM
> 
> Convert the i.MX thermal binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V2:
> 	- remove unnecessary property in compatible;
> 	- add detail description for interrupts;
> 	- add description for each item of nvmem-cells;
> 	- add more detail for "fsl,tempmon" description.

[...]

> +title: NXP i.MX Thermal Binding
> +
> +maintainers:
> +  - Shawn Guo <shawn.guo@xxxxxxxxxx>
> +  - Anson Huang <Anson.Huang@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx6q-tempmon
> +      - fsl,imx6sx-tempmon
> +      - fsl,imx7d-tempmon
> +
> +  interrupts:
> +    description: |
> +      The interrupt output of the controller, i.MX6Q has IRQ_HIGH which
> +      will be triggered when temperature is higher than high threshold,
> +      i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is
> IRQ_LOW
> +      and the other is IRQ_PANIC, when temperature is lower than low
> +      threshold, IRQ_LOW will be triggered, when temperature is higher
> +      than panic threshold, IRQ_PANIC will be triggered, and system can
> +      be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH,
> +      IRQ_LOW and IRQ_PANIC share same interrupt output of controller.
> +    maxItems: 1
> +
> +  nvmem-cells:
> +    items:
> +      - description: Phandle to the calibration data provided by ocotp
> +      - description: Phandle to the temperature grade provided by ocotp
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: calib
> +      - const: temp_grade
> +
> +  fsl,tempmon:
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    description: Phandle to the temperature sensor register map node.

This still looks vauge.
How about " Phandle to anatop system controller node"?

Otherwise, you can add my tag:
Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>

Regards
Aisheng

> +
> +  fsl,tempmon-data:
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    description: |
> +      Deprecated property, phandle pointer to fuse controller that contains
> +      TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
> +      calibration data can be found in SoC Reference Manual.
> +    deprecated: true
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - interrupts
> +  - fsl,tempmon
> +  - nvmem-cells
> +  - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx6sx-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    efuse@21bc000 {
> +         #address-cells = <1>;
> +         #size-cells = <1>;
> +         compatible = "fsl,imx6sx-ocotp", "syscon";
> +         reg = <0x021bc000 0x4000>;
> +         clocks = <&clks IMX6SX_CLK_OCOTP>;
> +
> +         tempmon_calib: calib@38 {
> +             reg = <0x38 4>;
> +         };
> +
> +         tempmon_temp_grade: temp-grade@20 {
> +             reg = <0x20 4>;
> +         };
> +    };
> +
> +    anatop@20c8000 {
> +        compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
> +        reg = <0x020c8000 0x1000>;
> +        interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
> +                     <0 54 IRQ_TYPE_LEVEL_HIGH>,
> +                     <0 127 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        tempmon {
> +             compatible = "fsl,imx6sx-tempmon";
> +             interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +             fsl,tempmon = <&anatop>;
> +             nvmem-cells = <&tempmon_calib>,
> <&tempmon_temp_grade>;
> +             nvmem-cell-names = "calib", "temp_grade";
> +             clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
> +        };
> +    };
> --
> 2.7.4