Re: [PATCH 04/15] PCI: brcmstb: Add compatibily of other chips

[Nicolas Saenz Julienne]

Hi Jim,

On Tue, 2020-05-19 at 16:34 -0400, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@xxxxxxxxxxxx>
> 
> Add in compatibility strings and code for three Broadcom STB chips.
> Some of the register locations, shifts, and masks are different
> for certain chips, requiring the use of different constants based
> on of_id.
> 
> We would like to add the following at this time to the match list
> but we need to wait until the end of this patchset so that
> everything works.
> 
>     { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
>     { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
>     { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
>     { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
> 
> Signed-off-by: Jim Quinlan <jquinlan@xxxxxxxxxxxx>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 103 +++++++++++++++++++++++---
>  1 file changed, 91 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c
> b/drivers/pci/controller/pcie-brcmstb.c
> index 73020b4ff090..c1cf4ea7d3d9 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -120,9 +120,8 @@
>  #define  PCIE_EXT_SLOT_SHIFT				15
>  #define  PCIE_EXT_FUNC_SHIFT				12
>  
> -#define PCIE_RGR1_SW_INIT_1				0x9210
>  #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
> -#define  PCIE_RGR1_SW_INIT_1_INIT_MASK			0x2
> +#define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
>  
>  /* PCIe parameters */
>  #define BRCM_NUM_PCIE_OUT_WINS		0x4
> @@ -152,6 +151,69 @@
>  #define SSC_STATUS_SSC_MASK		0x400
>  #define SSC_STATUS_PLL_LOCK_MASK	0x800
>  
> +#define IDX_ADDR(pcie)	\
> +	(pcie->reg_offsets[EXT_CFG_INDEX])
> +#define DATA_ADDR(pcie)	\
> +	(pcie->reg_offsets[EXT_CFG_DATA])
> +#define PCIE_RGR1_SW_INIT_1(pcie) \
> +	(pcie->reg_offsets[RGR1_SW_INIT_1])
> +
> +enum {
> +	RGR1_SW_INIT_1,
> +	EXT_CFG_INDEX,
> +	EXT_CFG_DATA,
> +};
> +
> +enum {
> +	RGR1_SW_INIT_1_INIT_MASK,
> +	RGR1_SW_INIT_1_INIT_SHIFT,
> +};
> +
> +enum pcie_type {
> +	GENERIC,
> +	BCM7278,
> +};
> +
> +struct pcie_cfg_data {
> +	const int *reg_field_info;
> +	const int *offsets;
> +	const enum pcie_type type;
> +};
> +
> +static const int pcie_reg_field_info[] = {
> +	[RGR1_SW_INIT_1_INIT_MASK] = 0x2,
> +	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
> +};
> +
> +static const int pcie_reg_field_info_bcm7278[] = {
> +	[RGR1_SW_INIT_1_INIT_MASK] = 0x1,
> +	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
> +};
> +
> +static const int pcie_offsets[] = {
> +	[RGR1_SW_INIT_1] = 0x9210,
> +	[EXT_CFG_INDEX]  = 0x9000,
> +	[EXT_CFG_DATA]   = 0x9004,
> +};
> +
> +static const struct pcie_cfg_data generic_cfg = {
> +	.reg_field_info	= pcie_reg_field_info,
> +	.offsets	= pcie_offsets,
> +	.type		= GENERIC,
> +};
> +
> +static const int pcie_offset_bcm7278[] = {
> +	[RGR1_SW_INIT_1] = 0xc010,
> +	[EXT_CFG_INDEX] = 0x9000,
> +	[EXT_CFG_DATA] = 0x9004,
> +};
> +
> +static const struct pcie_cfg_data bcm7278_cfg = {
> +	.reg_field_info = pcie_reg_field_info_bcm7278,
> +	.offsets	= pcie_offset_bcm7278,
> +	.type		= BCM7278,
> +};

It's not essential, but if v2 is due I'd suggest factoring out the bcm2728
specific structures above, and moving them to patch #15. This will keep a
clearer division between the patch introducing the infrastructure and the one
adding the support for a new device.

> +
>  struct brcm_msi {
>  	struct device		*dev;
>  	void __iomem		*base;
> @@ -176,6 +238,9 @@ struct brcm_pcie {
>  	int			gen;
>  	u64			msi_target_addr;
>  	struct brcm_msi		*msi;
> +	const int		*reg_offsets;
> +	const int		*reg_field_info;
> +	enum pcie_type		type;
>  };
>  
>  /*
> @@ -602,20 +667,21 @@ static struct pci_ops brcm_pcie_ops = {
>  
>  static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32
> val)
>  {
> -	u32 tmp;
> +	u32 tmp, mask =  pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
> +	u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];

I don't think you need shift here, IIUC u32p_replace_bits() will take care of
all the masking and shifting internally, moreover, you'd be able to drop the
shift entry from reg_field_info.

> -	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
> -	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK);
> -	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
> +	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
> +	tmp = (tmp & ~mask) | ((val << shift) & mask);
> +	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
>  }

Regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part