[PATCH v8 12/13] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm

[Robin Gong]

Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that configure
event_id1 only in case DEV_TO_DEV.

Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
Acked-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
 drivers/dma/imx-sdma.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index be86ae8..320104f 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1183,7 +1183,7 @@ static int sdma_config_channel(struct dma_chan *chan)
 	if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
 			(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
 		/* Handle multiple event channels differently */
-		if (sdmac->event_id1) {
+		if (sdmac->direction == DMA_DEV_TO_DEV) {
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
@@ -1351,9 +1351,9 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
 
 	sdma_channel_synchronize(chan);
 
-	if (sdmac->event_id0 >= 0)
-		sdma_event_disable(sdmac, sdmac->event_id0);
-	if (sdmac->event_id1)
+	sdma_event_disable(sdmac, sdmac->event_id0);
+
+	if (sdmac->direction == DMA_DEV_TO_DEV)
 		sdma_event_disable(sdmac, sdmac->event_id1);
 
 	sdmac->event_id0 = 0;
@@ -1651,13 +1651,11 @@ static int sdma_config(struct dma_chan *chan,
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
 	/* Set ENBLn earlier to make sure dma request triggered after that */
-	if (sdmac->event_id0 >= 0) {
-		if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
-			return -EINVAL;
-		sdma_event_enable(sdmac, sdmac->event_id0);
-	}
+	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+		return -EINVAL;
+	sdma_event_enable(sdmac, sdmac->event_id0);
 
-	if (sdmac->event_id1) {
+	if (sdmac->direction == DMA_DEV_TO_DEV) {
 		if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
 			return -EINVAL;
 		sdma_event_enable(sdmac, sdmac->event_id1);
-- 
2.7.4