Re: [PATCH v4 07/14] PCI: cadence: Add new *ops* for CPU addr fixup

[Rob Herring]

On Wed, May 06, 2020 at 08:44:22PM +0530, Kishon Vijay Abraham I wrote:
> Cadence driver uses "mem" memory resource to obtain the offset of
> configuration space address region, memory space address region and
> message space address region. The obtained offset is used to program
> the Address Translation Unit (ATU). However certain platforms like TI's
> J721E SoC require the absolute address to be programmed in the ATU and not
> just the offset.

Once again, Cadence host binding is broken (or at least the example is). 
The 'mem' region shouldn't even exist. It is overlapping the config 
space and 'ranges':

            reg = <0x0 0xfb000000  0x0 0x01000000>,
                  <0x0 0x41000000  0x0 0x00001000>,
                  <0x0 0x40000000  0x0 0x04000000>;
            reg-names = "reg", "cfg", "mem";

            ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
                     <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;


16M of registers looks a bit odd. I guess it doesn't matter 
unless you have a 32-bit platform and care about your virtual 
space. Probably should have been 3 regions for LM, RP, and AT looking 
at the driver.

Whatever outbound address translation you need should be based on 
'ranges'.

Rob