Re: [PATCH v2 2/6] dt-bindings: dma: dw: Add max burst transaction length property

[Serge Semin]

On Tue, May 19, 2020 at 10:43:04PM +0530, Vinod Koul wrote:
> On 17-05-20, 20:47, Serge Semin wrote:
> > On Fri, May 15, 2020 at 02:11:13PM +0300, Serge Semin wrote:
> > > On Fri, May 15, 2020 at 04:26:58PM +0530, Vinod Koul wrote:
> > > > On 15-05-20, 13:51, Andy Shevchenko wrote:
> > > > > On Fri, May 15, 2020 at 11:39:11AM +0530, Vinod Koul wrote:
> > > > > > On 12-05-20, 15:38, Andy Shevchenko wrote:
> > > > > > > On Tue, May 12, 2020 at 02:49:46PM +0300, Serge Semin wrote:
> > > > > > > > On Tue, May 12, 2020 at 12:08:04PM +0300, Andy Shevchenko wrote:
> > > > > > > > > On Tue, May 12, 2020 at 12:35:31AM +0300, Serge Semin wrote:
> > > > > > > > > > On Tue, May 12, 2020 at 12:01:38AM +0300, Andy Shevchenko wrote:
> > > > > > > > > > > On Mon, May 11, 2020 at 11:05:28PM +0300, Serge Semin wrote:
> > > > > > > > > > > > On Fri, May 08, 2020 at 02:12:42PM +0300, Andy Shevchenko wrote:
> > > > > > > > > > > > > On Fri, May 08, 2020 at 01:53:00PM +0300, Serge Semin wrote:
> > > > > 
> > > > > ...
> > > > > 
> > > > > > > I leave it to Rob and Vinod.
> > > > > > > It won't break our case, so, feel free with your approach.
> > > > > > 
> > > > > > I agree the DT is about describing the hardware and looks like value of
> > > > > > 1 is not allowed. If allowed it should be added..
> > > > > 
> > > > > It's allowed at *run time*, it's illegal in *pre-silicon stage* when
> > > > > synthesizing the IP.
> > > > 
> > > > Then it should be added ..
> > > 
> > > Vinod, max-burst-len is "MAXimum" burst length not "run-time or current or any
> > > other" burst length. It's a constant defined at the IP-core synthesis stage and
> > > according to the Data Book, MAX burst length can't be 1. The allowed values are
> > > exactly as I described in the binding [4, 8, 16, 32, ...]. MAX burst length
> > > defines the upper limit of the run-time burst length. So setting it to 1 isn't
> > > about describing a hardware, but using DT for the software convenience.
> > > 
> > > -Sergey
> > 
> > Vinod, to make this completely clear. According to the DW DMAC data book:
> > - In general, run-time parameter of the DMA transaction burst length (set in
> >   the SRC_MSIZE/DST_MSIZE fields of the channel control register) may belong
> >   to the set [1, 4, 8, 16, 32, 64, 128, 256].
> 
> so 1 is valid value for msize

Right.

> 
> > - Actual upper limit of the burst length run-time parameter is limited by a
> >   constant defined at the IP-synthesize stage (it's called DMAH_CHx_MAX_MULT_SIZE)
> >   and this constant belongs to the set [4, 8, 16, 32, 64, 128, 256]. (See, no 1
> >   in this set).
> 
> maximum can be 4 onwards, but in my configuration I can choose 1 as
> value for msize

It's true for all configurations. msize can be at least 0 or 1, which correspond
to 1 and 4 burst length respectively.

> 
> > So the run-time burst length in a case of particular DW DMA controller belongs
> > to the range:
> > 1 <= SRC_MSIZE <= DMAH_CHx_MAX_MULT_SIZE
> > and
> > 1 <= DST_MSIZE <= DMAH_CHx_MAX_MULT_SIZE
> > 
> > See. No mater which DW DMA controller we get each of them will at least support
> > the burst length of 1 and 4 transfer words. This is determined by design of the
> > DW DMA controller IP since DMAH_CHx_MAX_MULT_SIZE constant set starts with 4.
> > 
> > In this patch I suggest to add the max-burst-len property, which specifies
> > the upper limit for the run-time burst length. Since the maximum burst length
> > capable to be set to the SRC_MSIZE/DST_MSIZE fields of the DMA channel control
> > register is determined by the DMAH_CHx_MAX_MULT_SIZE constant (which can't be 1
> > by the DW DMA IP design), max-burst-len property as being also responsible for
> > the maximum burst length setting should be associated with DMAH_CHx_MAX_MULT_SIZE
> > thus should belong to the same set [4, 8, 16, 32, 64, 128, 256].
> > 
> > So 1 shouldn't be in the enum of the max-burst-len property constraint, because
> > hardware doesn't support such limitation by design, while setting 1 as
> > max-burst-len would mean incorrect description of the DMA controller.
> > 
> > Vinod, could you take a look at the info I provided above and say your final word
> > whether 1 should be really allowed to be in the max-burst-len enum constraints?
> > I'll do as you say in the next version of the patchset.
> 
> You are specifying the parameter which will be used to pick, i think
> starting with 4 makes sense as we are specifying maximum allowed values
> for msize. Values lesser than or equal to this would be allowed, I guess
> that should be added to documentation.

Right. Thanks. I'll a proper description to the property in the binding file.

-Sergey

> 
> thanks
> -- 
> ~Vinod