Re: [PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or not

[masonccyang]

Hi Pratyush,

Given cmd.nbytes a initial value & check it !

> 
> [PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or 
not
> 
> Each phase is given a separate 'dtr' field so mixed protocols like
> 4S-4D-4D can be supported.
> 
> Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> ---
>  drivers/spi/spi-mem.c       | 3 +++
>  include/linux/spi/spi-mem.h | 8 ++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
> index 9a86cc27fcc0..93e255287ab9 100644
> --- a/drivers/spi/spi-mem.c
> +++ b/drivers/spi/spi-mem.c
> @@ -156,6 +156,9 @@ bool spi_mem_default_supports_op(struct spi_mem 
*mem,
>                 op->data.dir == SPI_MEM_DATA_OUT))
>        return false;
> 
> +   if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
> +      return false;
> +

+       if (op->cmd.nbytes != 1)
+               return false;

>     return true;
>  }
>  EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);


 static int spi_mem_check_op(const struct spi_mem_op *op)
 {
-                if (!op->cmd.buswidth)
+                if (!op->cmd.buswidth || op->cmd.nbytes < 1 || 
op->cmd.nbytes > 2)
                                 return -EINVAL;


> diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
> index af9ff2f0f1b2..e3dcb956bf61 100644
> --- a/include/linux/spi/spi-mem.h
> +++ b/include/linux/spi/spi-mem.h

#define SPI_MEM_OP_CMD(__opcode, __buswidth)                    \
         {                                                       \
                 .buswidth = __buswidth,                         \
                 .opcode = __opcode,                             \
+                .nbytes = 1,                                    \
         }



> @@ -71,9 +71,11 @@ enum spi_mem_data_dir {
>   * struct spi_mem_op - describes a SPI memory operation
>   * @cmd.buswidth: number of IO lines used to transmit the command
>   * @cmd.opcode: operation opcode
> + * @cmd.dtr: whether the command opcode should be sent in DTR mode or 
not
>   * @addr.nbytes: number of address bytes to send. Can be zero if the 
operation
>   *       does not need to send an address
>   * @addr.buswidth: number of IO lines used to transmit the address 
cycles
> + * @addr.dtr: whether the address should be sent in DTR mode or not
>   * @addr.val: address value. This value is always sent MSB first on the 
bus.
>   *         Note that only @addr.nbytes are taken into account in this
>   *         address value, so users should make sure the value fits in 
the
> @@ -81,7 +83,9 @@ enum spi_mem_data_dir {
>   * @dummy.nbytes: number of dummy bytes to send after an opcode or 
address. Can
>   *        be zero if the operation does not require dummy bytes
>   * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
> + * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or 
not
>   * @data.buswidth: number of IO lanes used to send/receive the data
> + * @data.dtr: whether the data should be sent in DTR mode or not
>   * @data.dir: direction of the transfer
>   * @data.nbytes: number of data bytes to send/receive. Can be zero if 
the
>   *       operation does not involve transferring data
> @@ -91,22 +95,26 @@ enum spi_mem_data_dir {
>  struct spi_mem_op {
>     struct {
>        u8 buswidth;
> +      u8 dtr : 1;
>        u8 opcode;
>     } cmd;
> 
>     struct {
>        u8 nbytes;
>        u8 buswidth;
> +      u8 dtr : 1;
>        u64 val;
>     } addr;
> 
>     struct {
>        u8 nbytes;
>        u8 buswidth;
> +      u8 dtr : 1;
>     } dummy;
> 
>     struct {
>        u8 buswidth;
> +      u8 dtr : 1;
>        enum spi_mem_data_dir dir;
>        unsigned int nbytes;
>        union {
> -- 
> 2.26.2
> 

thanks & best regards,
Mason

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================