Re: [PATCH 1/3] arm64: dts: mt8183: Add gce setting in display node

[Matthias Brugger]

On 21/05/2020 12:47, Bibby Hsieh wrote:
> On Thu, 2020-05-21 at 12:10 +0200, Matthias Brugger wrote:
>> On 14/02/2020 11:06, Matthias Brugger wrote:
>>>
>>>
>>> On 14/02/2020 05:49, Bibby Hsieh wrote:
>>>> In order to use GCE function, we need add some information
>>>> into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
>>>>
>>>> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
>>>> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
>>>> ---
>>>
>>> For the next time please provide some context on which patches this are based
>>> on. Bet below the '---' with a link.
>>>
>>> For this time, on which patch/series is this based? :)
>>
>> Bibby can you please help and rebase the patch against my for-next branch [1].
>> I'm then happy to queue it. Not sure if we can make it for v5.8 as we are really
>> late, but we could try :)
> 
> Hi, Matthias,
> 
> NP, but this patch[1] is depends on another patch [2].
> Should I rebase them together into your for-next branch?
> 

I see and [2] one depends on the scpsys driver.
Then maybe better wait until we have the scpsys driver accepted.

Regards,
Matthias


> [1] https://patchwork.kernel.org/patch/11385863/
> [2] https://patchwork.kernel.org/patch/11316277/
> 
> Bibby
> 
>>
>> Thanks!
>> Matthias
>>
>> [1]
>> https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=for-next
>>
>>>
>>> Thanks,
>>> Matthias
>>>
>>>>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
>>>>  1 file changed, 16 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> index be4428c92f35..8b522b039a37 100644
>>>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> @@ -9,6 +9,7 @@
>>>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>  #include <dt-bindings/interrupt-controller/irq.h>
>>>>  #include <dt-bindings/power/mt8183-power.h>
>>>> +#include <dt-bindings/gce/mt8183-gce.h>
>>>>  #include "mt8183-pinfunc.h"
>>>>  
>>>>  / {
>>>> @@ -664,6 +665,9 @@
>>>>  			reg = <0 0x14000000 0 0x1000>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			#clock-cells = <1>;
>>>> +			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
>>>> +				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
>>>>  		};
>>>>  
>>>>  		ovl0: ovl@14008000 {
>>>> @@ -672,6 +676,7 @@
>>>>  			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_OVL0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
>>>>  		};
>>>>  
>>>>  		ovl_2l0: ovl@14009000 {
>>>> @@ -680,6 +685,7 @@
>>>>  			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
>>>>  		};
>>>>  
>>>>  		ovl_2l1: ovl@1400a000 {
>>>> @@ -688,6 +694,7 @@
>>>>  			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
>>>>  		};
>>>>  
>>>>  		rdma0: rdma@1400b000 {
>>>> @@ -697,6 +704,7 @@
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
>>>>  			mediatek,rdma_fifo_size = <5120>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
>>>>  		};
>>>>  
>>>>  		rdma1: rdma@1400c000 {
>>>> @@ -706,6 +714,7 @@
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
>>>>  			mediatek,rdma_fifo_size = <2048>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
>>>>  		};
>>>>  
>>>>  		color0: color@1400e000 {
>>>> @@ -715,6 +724,7 @@
>>>>  			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
>>>>  		};
>>>>  
>>>>  		ccorr0: ccorr@1400f000 {
>>>> @@ -723,6 +733,7 @@
>>>>  			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
>>>>  		};
>>>>  
>>>>  		aal0: aal@14010000 {
>>>> @@ -732,6 +743,7 @@
>>>>  			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_AAL0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
>>>>  		};
>>>>  
>>>>  		gamma0: gamma@14011000 {
>>>> @@ -741,6 +753,7 @@
>>>>  			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
>>>>  		};
>>>>  
>>>>  		dither0: dither@14012000 {
>>>> @@ -749,6 +762,7 @@
>>>>  			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>>  			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
>>>> +			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
>>>>  		};
>>>>  
>>>>  		mutex: mutex@14016000 {
>>>> @@ -756,6 +770,8 @@
>>>>  			reg = <0 0x14016000 0 0x1000>;
>>>>  			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
>>>>  			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> +			mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
>>>> +					      <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
>>>>  		};
>>>>  
>>>>  		smi_common: smi@14019000 {
>>>>
>>
>