[PATCH 3/5] clocksource/drivers/timer-riscv: Remove MMIO related stuff

[Anup Patel]

Right now the RISC-V timer is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR
   for clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT
   MMIO counter register for clocksource and CLINT MMIO compare
   register for clockevent device.

This patch removes MMIO related stuff from RISC-V timer driver
so that we can have a separate CLINT timer driver.

Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
---
 arch/riscv/Kconfig                |  2 +-
 arch/riscv/include/asm/timex.h    | 28 +++++++---------------------
 drivers/clocksource/Kconfig       |  2 +-
 drivers/clocksource/timer-riscv.c | 17 ++---------------
 4 files changed, 11 insertions(+), 38 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 2cf0c83c1a47..bbdc37a78f7b 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -52,7 +52,7 @@ config RISCV
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_MSI if PCI
 	select RISCV_INTC
-	select RISCV_TIMER
+	select RISCV_TIMER if RISCV_SBI
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_ARCH_TOPOLOGY if SMP
 	select ARCH_HAS_PTE_SPECIAL
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index bad2a7c2cda5..a3fb85d505d4 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,41 +7,27 @@
 #define _ASM_RISCV_TIMEX_H
 
 #include <asm/csr.h>
-#include <asm/mmio.h>
 
 typedef unsigned long cycles_t;
 
-extern u64 __iomem *riscv_time_val;
-extern u64 __iomem *riscv_time_cmp;
-
-#ifdef CONFIG_64BIT
-#define mmio_get_cycles()	readq_relaxed(riscv_time_val)
-#else
-#define mmio_get_cycles()	readl_relaxed(riscv_time_val)
-#define mmio_get_cycles_hi()	readl_relaxed(((u32 *)riscv_time_val) + 1)
-#endif
-
 static inline cycles_t get_cycles(void)
 {
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		return csr_read(CSR_TIME);
-	return mmio_get_cycles();
+	return csr_read(CSR_TIME);
 }
 #define get_cycles get_cycles
 
+static inline u32 get_cycles_hi(void)
+{
+	return csr_read(CSR_TIMEH);
+}
+#define get_cycles_hi get_cycles_hi
+
 #ifdef CONFIG_64BIT
 static inline u64 get_cycles64(void)
 {
 	return get_cycles();
 }
 #else /* CONFIG_64BIT */
-static inline u32 get_cycles_hi(void)
-{
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		return csr_read(CSR_TIMEH);
-	return mmio_get_cycles_hi();
-}
-
 static inline u64 get_cycles64(void)
 {
 	u32 hi, lo;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f2142e6bbea3..21950d9e3e9d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -650,7 +650,7 @@ config ATCPIT100_TIMER
 
 config RISCV_TIMER
 	bool "Timer for the RISC-V platform"
-	depends on GENERIC_SCHED_CLOCK && RISCV
+	depends on GENERIC_SCHED_CLOCK && RISCV_SBI
 	default y
 	select TIMER_PROBE
 	select TIMER_OF
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 5fb7c5ba5c91..3e7e0cf5b899 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -19,26 +19,13 @@
 #include <linux/of_irq.h>
 #include <asm/smp.h>
 #include <asm/sbi.h>
-
-u64 __iomem *riscv_time_cmp;
-u64 __iomem *riscv_time_val;
-
-static inline void mmio_set_timer(u64 val)
-{
-	void __iomem *r;
-
-	r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
-	writeq_relaxed(val, r);
-}
+#include <asm/timex.h>
 
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
 	csr_set(CSR_IE, IE_TIE);
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
-		sbi_set_timer(get_cycles64() + delta);
-	else
-		mmio_set_timer(get_cycles64() + delta);
+	sbi_set_timer(get_cycles64() + delta);
 	return 0;
 }
 
-- 
2.25.1