Re: [PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function

From: Pierre-Louis Bossart
Date: Thu May 21 2020 - 11:14:58 EST

Next message: Bjorn Helgaas: "Re: [PATCH] [v2] PCI: tegra194: Fix runtime PM imbalance on error"
Previous message: Ira Weiny: "Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice"
In reply to: Åukasz Majczak: "Re: [PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 5/21/20 9:43 AM, Åukasz Majczak wrote:

Pierre

Sorry, I didn't get it for the first time, you are suggesting to not
use DMIC01 as it is used by PCH-attached
dmics by other drivers.

Yes, it's confusing and it also took me time during the initial reviews of this driver to figure out it's different from the others.

My suggestion was indeed to avoid using DMIC01 but instead keep the traditional SSP0-based RX routes. You can still use the dmic fixup to constrain the word size/ channel count, but this should not add confusion on how the physical connections are handled.

Best regards,
Lukasz

czw., 21 maj 2020 o 16:36 Åukasz Majczak <lma@xxxxxxxxxxxx> napisaÅ(a):

Yes, my bad
it should be:
+ { "codec1_in", NULL, "DMIC01 Rx" },
+ { "DMIC01 Rx", NULL, "AIF1 Capture" },

The whole idea of taking the mic for SSP0 definition is that each BE
should have its own fixup. Before there was one fixup function, which
checked inside which BE is connected to which FE and applied the
proper fix, it was using the fact that "params" were part of
snd_soc_dpcm. That has changed and now params are "orphaned" so each
BE has to apply a specific fixup for itself.

Best regards,
Lukasz

czw., 21 maj 2020 o 16:25 Pierre-Louis Bossart
<pierre-louis.bossart@xxxxxxxxxxxxxxx> napisaÅ(a):

On 5/21/20 8:47 AM, Lukasz Majczak wrote:

Split be_hw_params_fixup function for different codecs as current common
function, leads to crash while trying to get snd_soc_dpcm with
container_of() macro in kabylake_ssp_fixup().
The crash call path looks as below:
soc_pcm_hw_params()
snd_soc_dai_hw_params(codec_dai, substream, &codec_params);
rtd->dai_link->be_hw_params_fixup(rtd, params)
kabylake_ssp_fixup()
In this case, codec_params is just a copy of an internal structure and is
not embedded into struct snd_soc_dpcm thus we cannot use
container_of() on it.

Signed-off-by: Lukasz Majczak <lma@xxxxxxxxxxxx>
---
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 130 ++++++++++++------
1 file changed, 85 insertions(+), 45 deletions(-)

diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 1b1f8d7a4ea3..12a9983979e0 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -171,8 +171,8 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
{ "hs_in", NULL, "ssp1 Rx" },
{ "ssp1 Rx", NULL, "AIF Capture" },

- { "codec1_in", NULL, "ssp0 Rx" },
- { "ssp0 Rx", NULL, "AIF1 Capture" },
+ { "codec1_in", NULL, "DMIC01 Rx" },
+ { "DMIC01 Rx", NULL, "AIF1 Capture" },

This doesn't seem right. This board uses DMICs attached to the codec so
we should not make references to routes that are used for PCH-attached
dmics in all other machine drivers:

{ "dmic01_hifi", NULL, "DMIC01 Rx" },
{ "DMIC01 Rx", NULL, "DMIC AIF" },

/* IV feedback path */
{ "codec0_fb_in", NULL, "ssp0 Rx"},
@@ -328,42 +328,52 @@ static const struct snd_soc_ops kabylake_rt5663_fe_ops = {
.startup = kbl_fe_startup,
};

-static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
- struct snd_pcm_hw_params *params)
+static void kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params, snd_pcm_format_t pcm_fmt)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
- struct snd_interval *chan = hw_param_interval(params,
+ struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
- struct snd_soc_dpcm *dpcm = container_of(
- params, struct snd_soc_dpcm, hw_params);
- struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link;
- struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link;

/*
* The ADSP will convert the FE rate to 48k, stereo, 24 bit
*/
- if (!strcmp(fe_dai_link->name, "Kbl Audio Port") ||
- !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") ||
- !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) {
- rate->min = rate->max = 48000;
- chan->min = chan->max = 2;
- snd_mask_none(fmt);
- snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
- } else if (!strcmp(fe_dai_link->name, "Kbl Audio DMIC cap")) {
+
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+
+ snd_mask_none(fmt);
+ snd_mask_set_format(fmt, pcm_fmt);
+}
+
+static int kabylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S16_LE);
+ return 0;
+}
+
+static int kabylake_ssp1_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+
+ kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S24_LE);
+ return 0;
+}
+
+static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+
if (params_channels(params) == 2 ||
DMIC_CH(dmic_constraints) == 2)
- chan->min = chan->max = 2;
+ channels->min = channels->max = 2;
else
- chan->min = chan->max = 4;
- }
- /*
- * The speaker on the SSP0 supports S16_LE and not S24_LE.
- * thus changing the mask here
- */
- if (!strcmp(be_dai_link->name, "SSP0-Codec"))
- snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE);
+ channels->min = channels->max = 4;

return 0;
}
@@ -400,20 +410,6 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
int ret = 0, j;

for_each_rtd_codec_dais(rtd, j, codec_dai) {
- if (!strcmp(codec_dai->component->name, RT5514_DEV_NAME)) {
- ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0, 8, 16);
- if (ret < 0) {
- dev_err(rtd->dev, "set TDM slot err:%d\n", ret);
- return ret;
- }
-
- ret = snd_soc_dai_set_sysclk(codec_dai,
- RT5514_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN);
- if (ret < 0) {
- dev_err(rtd->dev, "set sysclk err: %d\n", ret);
- return ret;
- }
- }
if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) {
ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16);
if (ret < 0) {
@@ -433,10 +429,37 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
return ret;
}

+static int kabylake_dmic01_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int ret = 0;
+
+ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0xF, 0, 8, 16);
+ if (ret < 0) {
+ dev_err(rtd->dev, "set TDM slot err:%d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(rtd->codec_dai,
+ RT5514_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(rtd->dev, "set sysclk err: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
static struct snd_soc_ops kabylake_ssp0_ops = {
.hw_params = kabylake_ssp0_hw_params,
};

+static struct snd_soc_ops kabylake_dmic01_ops = {
+ .hw_params = kabylake_dmic01_hw_params,
+};
+
+
static const unsigned int channels_dmic[] = {
4,
};
@@ -507,14 +530,19 @@ SND_SOC_DAILINK_DEF(ssp0_pin,
SND_SOC_DAILINK_DEF(ssp0_codec,
DAILINK_COMP_ARRAY(
/* Left */ COMP_CODEC(MAXIM_DEV0_NAME, KBL_MAXIM_CODEC_DAI),
- /* Right */COMP_CODEC(MAXIM_DEV1_NAME, KBL_MAXIM_CODEC_DAI),
- /* dmic */ COMP_CODEC(RT5514_DEV_NAME, KBL_REALTEK_DMIC_CODEC_DAI)));
+ /* Right */COMP_CODEC(MAXIM_DEV1_NAME, KBL_MAXIM_CODEC_DAI)));

SND_SOC_DAILINK_DEF(ssp1_pin,
DAILINK_COMP_ARRAY(COMP_CPU("SSP1 Pin")));
SND_SOC_DAILINK_DEF(ssp1_codec,
DAILINK_COMP_ARRAY(COMP_CODEC(RT5663_DEV_NAME, KBL_REALTEK_CODEC_DAI)));

+SND_SOC_DAILINK_DEF(dmic01_pin,
+ DAILINK_COMP_ARRAY(COMP_CPU("DMIC01 Pin")));
+SND_SOC_DAILINK_DEF(dmic01_codec,
+ DAILINK_COMP_ARRAY(
+ COMP_CODEC(RT5514_DEV_NAME, KBL_REALTEK_DMIC_CODEC_DAI)));
+
SND_SOC_DAILINK_DEF(idisp1_pin,
DAILINK_COMP_ARRAY(COMP_CPU("iDisp1 Pin")));
SND_SOC_DAILINK_DEF(idisp1_codec,
@@ -618,9 +646,8 @@ static struct snd_soc_dai_link kabylake_dais[] = {
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ignore_pmdown_time = 1,
- .be_hw_params_fixup = kabylake_ssp_fixup,
+ .be_hw_params_fixup = kabylake_ssp0_fixup,
.dpcm_playback = 1,
- .dpcm_capture = 1,
.ops = &kabylake_ssp0_ops,
SND_SOC_DAILINK_REG(ssp0_pin, ssp0_codec, platform),
},
@@ -632,12 +659,25 @@ static struct snd_soc_dai_link kabylake_dais[] = {
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ignore_pmdown_time = 1,
- .be_hw_params_fixup = kabylake_ssp_fixup,
+ .be_hw_params_fixup = kabylake_ssp1_fixup,
.ops = &kabylake_rt5663_ops,
.dpcm_playback = 1,
.dpcm_capture = 1,
SND_SOC_DAILINK_REG(ssp1_pin, ssp1_codec, platform),
},
+ {
+ .name = "dmic01",
+ .id = 2,
+ .no_pcm = 1,
+ .dai_fmt = SND_SOC_DAIFMT_DSP_B |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ignore_pmdown_time = 1,
+ .be_hw_params_fixup = kabylake_dmic_fixup,
+ .dpcm_capture = 1,
+ .ops = &kabylake_dmic01_ops,
+ SND_SOC_DAILINK_REG(dmic01_pin, dmic01_codec, platform),
+ },
{
.name = "iDisp1",
.id = 3,

base-commit: a4f6fc98cd2fa1774bcaeb248c67156ef9402a56

Next message: Bjorn Helgaas: "Re: [PATCH] [v2] PCI: tegra194: Fix runtime PM imbalance on error"
Previous message: Ira Weiny: "Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice"
In reply to: Åukasz Majczak: "Re: [PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]