Re: [PATCH v8 11/14] media: dt-bindings: Add jpeg enc device tree node document

[Tomasz Figa]

Hi Xia,

On Fri, Apr 03, 2020 at 05:40:30PM +0800, Xia Jiang wrote:
> Add jpeg enc device tree node document
> 
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> ---
> v8: no changes
> 
> v7: no changes
> 
> v6: no changes
> 
> v5: no changes
> 
> v4: no changes
> 
> v3: change compatible to SoC specific compatible
> 
> v2: no changes
> ---
>  .../bindings/media/mediatek-jpeg-encoder.txt  | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> 

Thank you for the patch. Please see my comments inline.

> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> new file mode 100644
> index 000000000000..fa8da699493b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> @@ -0,0 +1,37 @@
> +* MediaTek JPEG Encoder
> +
> +MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
> +
> +Required properties:
> +- compatible : should be one of:
> +               "mediatek,mt2701-jpgenc"
> +               ...

What does this "..." mean?

> +               followed by "mediatek,mtk-jpgenc"
> +- reg : physical base address of the JPEG encoder registers and length of
> +  memory mapped region.
> +- interrupts : interrupt number to the interrupt controller.
> +- clocks: device clocks, see
> +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.

nit: In principle the clocks should be named after the function the clock
performs on the consumer side, i.e. the JPEG block in this case, I guess
here it's just a generic clock that does everything, but I guess it comes
from somewhere. Is it the AHB clock or something? In that case it would
normally be called "ahb".

> +- power-domains: a phandle to the power domain, see
> +  Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,larb: must contain the local arbiters in the current SoCs, see
> +  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +  for details.

I believe this isn't necessary anymore, because larbs are added
automatically by the MTK IOMMU driver using device links. +CC Yong who
worked on that.

> +- iommus: should point to the respective IOMMU block with master port as
> +  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> +  for details.
> +
> +Example:
> +	jpegenc: jpegenc@1500a000 {
> +		compatible = "mediatek,mt2701-jpgenc",
> +			     "mediatek,mtk-jpgenc";
> +		reg = <0 0x1500a000 0 0x1000>;
> +		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> +		clocks =  <&imgsys CLK_IMG_VENC>;
> +		clock-names = "jpgenc";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +		mediatek,larb = <&larb2>;

Ditto.

Best regards,
Tomasz