[PATCH v3 3/3] arch, scripts: Add script to check relocations at compile time

[Alexandre Ghiti]

Relocating kernel at runtime is done very early in the boot process, so
it is not convenient to check for relocations there and react in case a
relocation was not expected.

Powerpc architecture has a script that allows to check at compile time
for such unexpected relocations: extract the common logic to scripts/
and add arch specific scripts triggered at postlink.

At the moment, powerpc and riscv architectures take advantage of this
compile-time check.

Signed-off-by: Alexandre Ghiti <alex@xxxxxxxx>
---
 arch/powerpc/tools/relocs_check.sh | 18 ++-------------
 arch/riscv/Makefile.postlink       | 36 ++++++++++++++++++++++++++++++
 arch/riscv/tools/relocs_check.sh   | 26 +++++++++++++++++++++
 scripts/relocs_check.sh            | 20 +++++++++++++++++
 4 files changed, 84 insertions(+), 16 deletions(-)
 create mode 100644 arch/riscv/Makefile.postlink
 create mode 100755 arch/riscv/tools/relocs_check.sh
 create mode 100755 scripts/relocs_check.sh

diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
index 014e00e74d2b..e367895941ae 100755
--- a/arch/powerpc/tools/relocs_check.sh
+++ b/arch/powerpc/tools/relocs_check.sh
@@ -15,21 +15,8 @@ if [ $# -lt 3 ]; then
 	exit 1
 fi
 
-# Have Kbuild supply the path to objdump and nm so we handle cross compilation.
-objdump="$1"
-nm="$2"
-vmlinux="$3"
-
-# Remove from the bad relocations those that match an undefined weak symbol
-# which will result in an absolute relocation to 0.
-# Weak unresolved symbols are of that form in nm output:
-# "                  w _binary__btf_vmlinux_bin_end"
-undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
-
 bad_relocs=$(
-$objdump -R "$vmlinux" |
-	# Only look at relocation lines.
-	grep -E '\<R_' |
+${srctree}/scripts/relocs_check.sh "$@" |
 	# These relocations are okay
 	# On PPC64:
 	#	R_PPC64_RELATIVE, R_PPC64_NONE
@@ -43,8 +30,7 @@ R_PPC_ADDR16_LO
 R_PPC_ADDR16_HI
 R_PPC_ADDR16_HA
 R_PPC_RELATIVE
-R_PPC_NONE' |
-	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
+R_PPC_NONE'
 )
 
 if [ -z "$bad_relocs" ]; then
diff --git a/arch/riscv/Makefile.postlink b/arch/riscv/Makefile.postlink
new file mode 100644
index 000000000000..bf2b2bca1845
--- /dev/null
+++ b/arch/riscv/Makefile.postlink
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+# ===========================================================================
+# Post-link riscv pass
+# ===========================================================================
+#
+# Check that vmlinux relocations look sane
+
+PHONY := __archpost
+__archpost:
+
+-include include/config/auto.conf
+include scripts/Kbuild.include
+
+quiet_cmd_relocs_check = CHKREL  $@
+cmd_relocs_check = 							\
+	$(CONFIG_SHELL) $(srctree)/arch/riscv/tools/relocs_check.sh "$(OBJDUMP)" "$(NM)" "$@"
+
+# `@true` prevents complaint when there is nothing to be done
+
+vmlinux: FORCE
+	@true
+ifdef CONFIG_RELOCATABLE
+	$(call if_changed,relocs_check)
+endif
+
+%.ko: FORCE
+	@true
+
+clean:
+	@true
+
+PHONY += FORCE clean
+
+FORCE:
+
+.PHONY: $(PHONY)
diff --git a/arch/riscv/tools/relocs_check.sh b/arch/riscv/tools/relocs_check.sh
new file mode 100755
index 000000000000..baeb2e7b2290
--- /dev/null
+++ b/arch/riscv/tools/relocs_check.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Based on powerpc relocs_check.sh
+
+# This script checks the relocations of a vmlinux for "suspicious"
+# relocations.
+
+if [ $# -lt 3 ]; then
+        echo "$0 [path to objdump] [path to nm] [path to vmlinux]" 1>&2
+        exit 1
+fi
+
+bad_relocs=$(
+${srctree}/scripts/relocs_check.sh "$@" |
+	# These relocations are okay
+	#	R_RISCV_RELATIVE
+	grep -F -w -v 'R_RISCV_RELATIVE'
+)
+
+if [ -z "$bad_relocs" ]; then
+	exit 0
+fi
+
+num_bad=$(echo "$bad_relocs" | wc -l)
+echo "WARNING: $num_bad bad relocations"
+echo "$bad_relocs"
diff --git a/scripts/relocs_check.sh b/scripts/relocs_check.sh
new file mode 100755
index 000000000000..137c660499f3
--- /dev/null
+++ b/scripts/relocs_check.sh
@@ -0,0 +1,20 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Get a list of all the relocations, remove from it the relocations
+# that are known to be legitimate and return this list to arch specific
+# script that will look for suspicious relocations.
+
+objdump="$1"
+nm="$2"
+vmlinux="$3"
+
+# Remove from the possible bad relocations those that match an undefined
+#Âweak symbol which will result in an absolute relocation to 0.
+# Weak unresolved symbols are of that form in nm output:
+# "                  w _binary__btf_vmlinux_bin_end"
+undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
+
+$objdump -R "$vmlinux" |
+	grep -E '\<R_' |
+	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
-- 
2.20.1