Re: [PATCH v5 07/13] soc: mediatek: cmdq: add write_s function

[Dennis-YC Hsieh]

Hi Mattias,

Thanks for your comment.

On Sat, 2020-05-16 at 20:14 +0200, Matthias Brugger wrote:
> 
> On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> > add write_s function in cmdq helper functions which
> > writes value contains in internal register to address
> > with large dma access support.
> > 
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> > Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> > ---
> >  drivers/soc/mediatek/mtk-cmdq-helper.c   | 34 +++++++++++++++++++++++-
> >  include/linux/mailbox/mtk-cmdq-mailbox.h |  2 ++
> >  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++
> >  3 files changed, 55 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 33153d17c9d9..90f1ff2b4b00 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -18,6 +18,10 @@ struct cmdq_instruction {
> >  	union {
> >  		u32 value;
> >  		u32 mask;
> > +		struct {
> > +			u16 arg_c;
> > +			u16 src_reg;
> > +		};
> >  	};
> >  	union {
> >  		u16 offset;
> > @@ -29,7 +33,7 @@ struct cmdq_instruction {
> >  		struct {
> >  			u8 sop:5;
> >  			u8 arg_c_t:1;
> > -			u8 arg_b_t:1;
> > +			u8 src_t:1;
> 
> fixing patch 6/13 please. seems the struct should be added in this patch.

ok, will move to this patch.

> 
> >  			u8 dst_t:1;
> >  		};
> >  	};
> > @@ -222,6 +226,34 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  }
> >  EXPORT_SYMBOL(cmdq_pkt_write_mask);
> >  
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx, u32 mask)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> > +	int err;
> > +
> > +	if (mask != U32_MAX) {
> > +		inst.op = CMDQ_CODE_MASK;
> > +		inst.mask = ~mask;
> > +		err = cmdq_pkt_append_command(pkt, inst);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		inst.mask = 0;
> > +		inst.op = CMDQ_CODE_WRITE_S_MASK;
> > +	} else {
> > +		inst.op = CMDQ_CODE_WRITE_S;
> > +	}
> > +
> > +	inst.src_t = CMDQ_REG_TYPE;
> 
> Not defined.
> Please make sure that every patch compiles on it's own and does not add a
> regression. This is very helpful if we have to bisect the kernel in the future.

May I know which part not defined? The src_t defined on top of this
patch and CMDQ_REG_TYPE defined in last patc (see 06/13).

> 
> > +	inst.sop = high_addr_reg_idx;
> > +	inst.offset = addr_low;
> > +	inst.src_reg = src_reg_idx;
> > +
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_s);
> > +
> >  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> >  {
> >  	struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > index 121c3bb6d3de..8ef87e1bd03b 100644
> > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > @@ -59,6 +59,8 @@ enum cmdq_code {
> >  	CMDQ_CODE_JUMP = 0x10,
> >  	CMDQ_CODE_WFE = 0x20,
> >  	CMDQ_CODE_EOC = 0x40,
> > +	CMDQ_CODE_WRITE_S = 0x90,
> > +	CMDQ_CODE_WRITE_S_MASK = 0x91,
> >  	CMDQ_CODE_LOGIC = 0xa0,
> >  };
> >  
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 83340211e1d3..c72d826d8934 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -12,6 +12,8 @@
> >  #include <linux/timer.h>
> >  
> >  #define CMDQ_NO_TIMEOUT		0xffffffffu
> > +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> > +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
> >  
> >  struct cmdq_pkt;
> >  
> > @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
> >  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> >  			u16 offset, u32 value, u32 mask);
> >  
> > +/**
> > + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @high_addr_reg_idx:	internal regisger ID which contains high address of pa
> 
> s/regisger/register

will fix

> 
> > + * @addr_low:	low address of pa
> > + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> > + * @mask:	the specified target address mask, use U32_MAX if no need
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> > + * to get high addrees and call cmdq_pkt_assign() to assign value into internal
> 
> s/addrees/address

will fix

> 
> > + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameterwhen
> 
> s/parameterwhen/parameter when

will fix

> 
> > + * call to this function.
> > + */
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +		     u16 addr_low, u16 src_reg_idx, u32 mask);
> > +
> 
> In general I wonder if we shouldn't provide two functions, one that writes a
> mask and on for the else case.

ok, I'll separate this function to cmdq_pkt_write_s and
cmdq_pkt_write_s_mask. Let the client choose which case is more
suitable.


> 
> Regards,
> Matthias
> 
> >  /**
> >   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> >   * @pkt:	the CMDQ packet
> >