Re: [PATCH v5 09/13] soc: mediatek: cmdq: add write_s value function

[Dennis-YC Hsieh]

Hi Matthias,

Thanks for your comment.

On Sat, 2020-05-16 at 20:20 +0200, Matthias Brugger wrote:
> 
> On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> > add write_s function in cmdq helper functions which
> > writes a constant value to address with large dma
> > access support.
> > 
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> > Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> > ---
> >  drivers/soc/mediatek/mtk-cmdq-helper.c | 26 ++++++++++++++++++++++++++
> >  include/linux/soc/mediatek/mtk-cmdq.h  | 14 ++++++++++++++
> >  2 files changed, 40 insertions(+)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 03c129230cd7..a9ebbabb7439 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -269,6 +269,32 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> >  }
> >  EXPORT_SYMBOL(cmdq_pkt_write_s);
> >  
> > +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +			   u16 addr_low, u32 value, u32 mask)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> > +	int err;
> > +
> > +	if (mask != U32_MAX) {
> > +		inst.op = CMDQ_CODE_MASK;
> > +		inst.mask = ~mask;
> > +		err = cmdq_pkt_append_command(pkt, inst);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		inst.op = CMDQ_CODE_WRITE_S_MASK;
> > +	} else {
> > +		inst.op = CMDQ_CODE_WRITE_S;
> > +	}
> > +
> > +	inst.sop = high_addr_reg_idx;
> 
> Writing u16 value in a 5 bit wide variable?

We need only 5 bits in this case. I'll change high_addr_reg_idx
parameter to u8.

> 
> > +	inst.offset = addr_low;
> > +	inst.value = value;
> > +
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_s_value);
> > +
> >  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> >  {
> >  	struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 01b4184af310..fec292aac83c 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -135,6 +135,20 @@ int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
> >  int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> >  		     u16 addr_low, u16 src_reg_idx, u32 mask);
> >  
> > +/**
> > + * cmdq_pkt_write_s_value() - append write_s command with mask to the CMDQ
> > + *			      packet which write value to a physical address
> > + * @pkt:	the CMDQ packet
> > + * @high_addr_reg_idx:	internal regisger ID which contains high address of pa
> 
> register

will fix


Regards,
Dennis

> 
> > + * @addr_low:	low address of pa
> > + * @value:	the specified target value
> > + * @mask:	the specified target mask
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > +			   u16 addr_low, u32 value, u32 mask);
> > +
> >  /**
> >   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> >   * @pkt:	the CMDQ packet
> >