[PATCH v3 09/10] media: i2c: imx290: Move the settle time delay out of loop

[Andrey Konovalov]

From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

The 10ms settle time is needed only at the end of all consecutive
register writes. So move the delay to outside of the for loop of
imx290_set_register_array().

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Andrey Konovalov <andrey.konovalov@xxxxxxxxxx>
---
 drivers/media/i2c/imx290.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 88850f3b1427..ee5c95cf64f3 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -347,11 +347,11 @@ static int imx290_set_register_array(struct imx290 *imx290,
 		ret = imx290_write_reg(imx290, settings->reg, settings->val);
 		if (ret < 0)
 			return ret;
-
-		/* Settle time is 10ms for all registers */
-		msleep(10);
 	}
 
+	/* Provide 10ms settle time */
+	msleep(10);
+
 	return 0;
 }
 
-- 
2.17.1