[PATCH 3/4] ARM: dts: r8a7742-iwg21d-q7: Enable Ethernet avb

[Lad Prabhakar]

Enable ethernet avb on iWave RZ/G1H carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index bb1deb0..c57a571 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -15,6 +15,7 @@
 	aliases {
 		serial2 = &scifa2;
 		serial4 = &scifb2;
+		ethernet0 = &avb;
 	};
 
 	chosen {
@@ -45,7 +46,27 @@
 	};
 };
 
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
 &pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
 	scifa2_pins: scifa2 {
 		groups = "scifa2_data_c";
 		function = "scifa2";
-- 
2.7.4