[PATCH v4 0/2] gpio: generic regmap implementation

[Michael Walle]

This series is a split off of the sl28cpld series:
https://lore.kernel.org/linux-gpio/20200423174543.17161-1-michael@xxxxxxxx/

I wasn't sure if I should also include the gpiochip_irqchip_add_domain()
patch here. So feel free to skip it. OTOH if you use interrupts with
gpio-regmap it is quite handy.

For an actual user see the patch 11/16 ("gpio: add support for the sl28cpld
GPIO controller") of the series above.

Changes since v3:
 - set reg_dat_base, that was actually broken
 - fix typo
 - fix swapped reg_in_dir/reg_out_dir documentation
 - use "goto err" in error path in gpio_regmap_register()

Changes since v2:
 See changelog in the former patch series.

Michael Walle (2):
  gpiolib: Introduce gpiochip_irqchip_add_domain()
  gpio: add a reusable generic gpio_chip using regmap

 drivers/gpio/Kconfig        |   4 +
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/gpio-regmap.c  | 343 ++++++++++++++++++++++++++++++++++++
 drivers/gpio/gpiolib.c      |  20 +++
 include/linux/gpio-regmap.h |  69 ++++++++
 include/linux/gpio/driver.h |   3 +
 6 files changed, 440 insertions(+)
 create mode 100644 drivers/gpio/gpio-regmap.c
 create mode 100644 include/linux/gpio-regmap.h

-- 
2.20.1