Re: [PATCH v8 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY

[Rob Herring]

On Wed, 13 May 2020 20:22:37 +0300, Laurent Pinchart wrote:
> From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
> 
> Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed
> Processing System Gigabit Transceiver which provides PHY capabilities to
> USB, SATA, PCIE, Display Port and Ehernet SGMII controllers.
> 
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changes since v7:
> 
> - Switch to GPL-2.0-only OR BSD-2-Clause
> 
> Changes since v6:
> 
> - Fixed specification of compatible-dependent xlnx,tx-termination-fix
>   property
> - Dropped status property from example
> - Use 4 spaces to indent example
> 
> Changes since v5:
> 
> - Document clocks and clock-names properties
> - Document resets and reset-names properties
> - Replace subnodes with an additional entry in the PHY cells
> - Drop lane frequency PHY cell, replaced by reference clock phandle
> - Convert bindings to YAML
> - Reword the subject line
> - Drop Rob's R-b as the bindings have significantly changed
> - Drop resets and reset-names properties
> ---
>  .../bindings/phy/xlnx,zynqmp-psgtr.yaml       | 105 ++++++++++++++++++
>  include/dt-bindings/phy/phy.h                 |   1 +
>  2 files changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>