[PATCH v3 07/12] i2c: designware: Add Baytrail sem config DW I2C platform dependency

[Serge Semin]

Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C
platform driver. It's a bit confusing to see it's config in the menu at
some separated place with no reference to the platform code. Let's move the
config definition to be below the I2C_DESIGNWARE_PLATFORM config and mark
it with "depends on I2C_DESIGNWARE_PLATFORM" statement. By doing so the
config menu will display the feature right below the DW I2C platform
driver item and will indent it to the right so signifying its belonging.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx

---

Changelog v3:

- Replace if-endif clause around the I2C_DESIGNWARE_BAYTRAIL config
  with "depends on" operator.
---
 drivers/i2c/busses/Kconfig | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b907d4046942..4e1997642e73 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -538,6 +538,19 @@ config I2C_DESIGNWARE_PLATFORM
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-platform.
 
+config I2C_DESIGNWARE_BAYTRAIL
+	bool "Intel Baytrail I2C semaphore support"
+	depends on ACPI
+	depends on I2C_DESIGNWARE_PLATFORM
+	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
+		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
+	help
+	  This driver enables managed host access to the PMIC I2C bus on select
+	  Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
+	  the host to request uninterrupted access to the PMIC's I2C bus from
+	  the platform firmware controlling it. You should say Y if running on
+	  a BayTrail system using the AXP288.
+
 config I2C_DESIGNWARE_SLAVE
 	bool "Synopsys DesignWare Slave"
 	depends on I2C_DESIGNWARE_CORE
@@ -560,18 +573,6 @@ config I2C_DESIGNWARE_PCI
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-pci.
 
-config I2C_DESIGNWARE_BAYTRAIL
-	bool "Intel Baytrail I2C semaphore support"
-	depends on ACPI
-	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
-		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
-	help
-	  This driver enables managed host access to the PMIC I2C bus on select
-	  Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
-	  the host to request uninterrupted access to the PMIC's I2C bus from
-	  the platform firmware controlling it. You should say Y if running on
-	  a BayTrail system using the AXP288.
-
 config I2C_DIGICOLOR
 	tristate "Conexant Digicolor I2C driver"
 	depends on ARCH_DIGICOLOR || COMPILE_TEST
-- 
2.26.2