[PATCH net-next v2 0/2] net: enetc: remove bootloader dependency

[Michael Walle]

These patches were picked from the following series:
https://lore.kernel.org/netdev/1567779344-30965-1-git-send-email-claudiu.manoil@xxxxxxx/
They have never been resent. I've picked them up, addressed Andrews
comments, fixed some more bugs and asked Claudiu if I can keep their SOB
tags; he agreed. I've tested this on our board which happens to have a
bootloader which doesn't do the enetc setup in all cases.

changes since v1:
 - mdiobus id is '"imdio-%s", dev_name(dev)' because the plain dev_name()
   is used by the emdio.
 - use mdiobus_write() instead of imdio->write(imdio, ..), since this is
   already a full featured mdiobus
 - set phy_mask to ~0 to avoid scanning the bus
 - use phy_interface_mode_is_rgmii(phy_mode) to also include the RGMII
   modes with pad delays.
 - move enetc_imdio_init() to enetc_pf.c, there shouldn't be any other
   users, should it?
 - renamed serdes to SerDes
 - printing the error code of mdiobus_register() in the error path
 - call mdiobus_unregister() on _remove()
 - call devm_mdiobus_free() if mdiobus_register() fails, since an
   error is not fatal

Alex Marginean (1):
  net: enetc: Use DT protocol information to set up the ports

Claudiu Manoil (1):
  net: enetc: Initialize SerDes for SGMII and SXGMII protocols

 .../net/ethernet/freescale/enetc/enetc_hw.h   |  17 ++
 .../net/ethernet/freescale/enetc/enetc_pf.c   | 151 +++++++++++++++---
 .../net/ethernet/freescale/enetc/enetc_pf.h   |   4 +
 3 files changed, 148 insertions(+), 24 deletions(-)

-- 
2.20.1