Re: [PATCH v2 1/9] dt-bindings: mmc: Convert sdhci-pxa to json-schema

[Ulf Hansson]

On Thu, 21 May 2020 at 11:14, Lubomir Rintel <lkundrak@xxxxx> wrote:
>
> Convert the sdhci-pxa binding to DT schema format using json-schema.
>
> At the same time, fix a couple of issues with the examples discovered by
> the validation tool -- a semicolon instead of a comma and wrong node names.
>
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>

Rob, are you fine with this v2? I am intending to queue it up via my
mmc tree, unless you want to pick it?

Kind regards
Uffe

>
> ---
> Changes since v1:
> - move reg-names items: from the conditional to main properties:, only
>   specify maxItems and minItems in conditional branches
> - Specify minItems and maxItems in properties/reg instad of on
>   conditional branchs
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
>
>  .../devicetree/bindings/mmc/sdhci-pxa.txt     |  50 ---------
>  .../devicetree/bindings/mmc/sdhci-pxa.yaml    | 103 ++++++++++++++++++
>  2 files changed, 103 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> deleted file mode 100644
> index 3d1b449d6097..000000000000
> --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -* Marvell sdhci-pxa v2/v3 controller
> -
> -This file documents differences between the core properties in mmc.txt
> -and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
> -
> -Required properties:
> -- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
> -  "marvell,armada-380-sdhci".
> -- reg:
> -  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
> -    the SDHCI registers.
> -
> -  * for "marvell,armada-380-sdhci", three register areas. The first
> -    one for the SDHCI registers themselves, the second one for the
> -    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
> -    SDIO3 Configuration register
> -- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
> -  for "marvell,armada-380-sdhci"
> -- clocks: Array of clocks required for SDHCI; requires at least one for
> -    I/O clock.
> -- clock-names: Array of names corresponding to clocks property; shall be
> -    "io" for I/O clock and "core" for optional core clock.
> -
> -Optional properties:
> -- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
> -
> -Example:
> -
> -sdhci@d4280800 {
> -       compatible = "mrvl,pxav3-mmc";
> -       reg = <0xd4280800 0x800>;
> -       bus-width = <8>;
> -       interrupts = <27>;
> -       clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
> -       clock-names = "io", "core";
> -       non-removable;
> -       mrvl,clk-delay-cycles = <31>;
> -};
> -
> -sdhci@d8000 {
> -       compatible = "marvell,armada-380-sdhci";
> -       reg-names = "sdhci", "mbus", "conf-sdio3";
> -       reg = <0xd8000 0x1000>,
> -               <0xdc000 0x100>;
> -               <0x18454 0x4>;
> -       interrupts = <0 25 0x4>;
> -       clocks = <&gateclk 17>;
> -       clock-names = "io";
> -       mrvl,clk-delay-cycles = <0x1F>;
> -};
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
> new file mode 100644
> index 000000000000..27ea069aa5fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell PXA SDHCI v2/v3 bindings
> +
> +maintainers:
> +  - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> +  - Rob Herring <robh+dt@xxxxxxxxxx>
> +
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: marvell,armada-380-sdhci
> +    then:
> +      properties:
> +        regs:
> +          minItems: 3
> +        reg-names:
> +          minItems: 3
> +      required:
> +        - reg-names
> +    else:
> +      properties:
> +        regs:
> +          maxItems: 1
> +        reg-names:
> +          maxItems: 1
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mrvl,pxav2-mmc
> +      - mrvl,pxav3-mmc
> +      - marvell,armada-380-sdhci
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: sdhci
> +      - const: mbus
> +      - const: conf-sdio3
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: io
> +      - const: core
> +
> +  mrvl,clk-delay-cycles:
> +    description: Specify a number of cycles to delay for tuning.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/berlin2.h>
> +    mmc@d4280800 {
> +        compatible = "mrvl,pxav3-mmc";
> +        reg = <0xd4280800 0x800>;
> +        bus-width = <8>;
> +        interrupts = <27>;
> +        clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
> +        clock-names = "io", "core";
> +        non-removable;
> +        mrvl,clk-delay-cycles = <31>;
> +    };
> +  - |
> +    mmc@d8000 {
> +        compatible = "marvell,armada-380-sdhci";
> +        reg-names = "sdhci", "mbus", "conf-sdio3";
> +        reg = <0xd8000 0x1000>,
> +              <0xdc000 0x100>,
> +              <0x18454 0x4>;
> +        interrupts = <0 25 0x4>;
> +        clocks = <&gateclk 17>;
> +        clock-names = "io";
> +        mrvl,clk-delay-cycles = <0x1F>;
> +    };
> +
> +...
> --
> 2.26.2
>