[PATCH v3 14/25] clk: bcm: rpi: Add clock id to data

[Maxime Ripard]

The driver has really only supported one clock so far and has hardcoded the
ID used in communications with the firmware in all the functions
implementing the clock framework hooks. Let's store that in the clock data
structure so that we can support more clocks later on.

Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/clk-raspberrypi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 00735704eabc..97ac04604b0a 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -39,6 +39,9 @@ struct raspberrypi_clk {
 
 struct raspberrypi_clk_data {
 	struct clk_hw hw;
+
+	unsigned int id;
+
 	struct raspberrypi_clk *rpi;
 };
 
@@ -91,7 +94,7 @@ static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
 
 	ret = raspberrypi_clock_property(rpi->firmware,
 					 RPI_FIRMWARE_GET_CLOCK_STATE,
-					 RPI_FIRMWARE_ARM_CLK_ID, &val);
+					 data->id, &val);
 	if (ret)
 		return 0;
 
@@ -110,8 +113,7 @@ static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
 
 	ret = raspberrypi_clock_property(rpi->firmware,
 					 RPI_FIRMWARE_GET_CLOCK_RATE,
-					 RPI_FIRMWARE_ARM_CLK_ID,
-					 &val);
+					 data->id, &val);
 	if (ret)
 		return ret;
 
@@ -129,8 +131,7 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	ret = raspberrypi_clock_property(rpi->firmware,
 					 RPI_FIRMWARE_SET_CLOCK_RATE,
-					 RPI_FIRMWARE_ARM_CLK_ID,
-					 &new_rate);
+					 data->id, &new_rate);
 	if (ret)
 		dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
 				    clk_hw_get_name(hw), ret);
@@ -183,6 +184,7 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	if (!data)
 		return -ENOMEM;
 	data->rpi = rpi;
+	data->id = RPI_FIRMWARE_ARM_CLK_ID;
 
 	/* All of the PLLs derive from the external oscillator. */
 	init.parent_names = (const char *[]){ "osc" };
@@ -194,8 +196,7 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	/* Get min & max rates set by the firmware */
 	ret = raspberrypi_clock_property(rpi->firmware,
 					 RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
-					 RPI_FIRMWARE_ARM_CLK_ID,
-					 &min_rate);
+					 data->id, &min_rate);
 	if (ret) {
 		dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
 			init.name, ret);
@@ -204,8 +205,7 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 
 	ret = raspberrypi_clock_property(rpi->firmware,
 					 RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
-					 RPI_FIRMWARE_ARM_CLK_ID,
-					 &max_rate);
+					 data->id, &max_rate);
 	if (ret) {
 		dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
 			init.name, ret);
-- 
git-series 0.9.1