Re: [PATCHv1 1/2] power: supply: gpio-charger: add charge-current-limit feature

From: Rob Herring
Date: Wed May 27 2020 - 21:56:22 EST

Next message: Stephen Boyd: "Re: [PATCH V6 5/5] arm64: dts: ipq6018: Add support for apss pll"
Previous message: Laurent Pinchart: "Re: [PATCH v8 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, May 13, 2020 at 01:56:00PM +0200, Sebastian Reichel wrote:
> Add new charge-current-limit feature to gpio-charger. This also
> makes the online status GPIO optional, since hardware might only
> expose the charge-current-limit feature and there is no good reason
> to have it mandatory now that different GPIOs are supported.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> ---
> .../bindings/power/supply/gpio-charger.txt | 11 +-
> drivers/power/supply/gpio-charger.c | 176 ++++++++++++++++--
> 2 files changed, 174 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> index 0fb33b2c62a6..dbfd29029f69 100644
> --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
> @@ -2,8 +2,6 @@ gpio-charger
>
> Required properties :
> - compatible : "gpio-charger"
> - - gpios : GPIO indicating the charger presence.
> - See GPIO binding in bindings/gpio/gpio.txt .
> - charger-type : power supply type, one of
> unknown
> battery
> @@ -15,7 +13,13 @@ Required properties :
> usb-aca (USB accessory charger adapter)
>
> Optional properties:
> + - gpios : GPIO indicating the charger presence.
> + See GPIO binding in bindings/gpio/gpio.txt .
> - charge-status-gpios: GPIO indicating whether a battery is charging.
> + - charge-current-limit-gpios: Output GPIOs specifiers for limiting the charge current
> + - charge-current-limit-mapping: List of touples with current in uA and a GPIO bitmap (in this order).
> + The GPIOs are encoded in the same order as specified in charge-current-limit-gpios.

TBC, index 0 GPIO is bit 0?

> + The touples must be provided in descending order of the current limit.

tuples

Wrap at 80 columns.

>
> Example:
>
> @@ -24,6 +28,9 @@ Example:
> charger-type = "usb-sdp";
> gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
> charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
> +
> + charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>, <&gpioA 12 GPIO_ACTIVE_HIGH>;
> + charge-current-limit-mapping = <2500000 0x00>, <700000 0x01>, <0 0x02>;
> };
>
> battery {
> diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
> index 1b959c7f8b0e..4a5eac7cc36c 100644
> --- a/drivers/power/supply/gpio-charger.c
> +++ b/drivers/power/supply/gpio-charger.c
> @@ -18,7 +18,13 @@
>
> #include <linux/power/gpio-charger.h>
>
> +struct gpio_mapping {
> + u32 limit_ua;
> + u32 gpiodata;
> +} __packed;
> +
> struct gpio_charger {
> + struct device *dev;
> unsigned int irq;
> unsigned int charge_status_irq;
> bool wakeup_enabled;
> @@ -27,6 +33,11 @@ struct gpio_charger {
> struct power_supply_desc charger_desc;
> struct gpio_desc *gpiod;
> struct gpio_desc *charge_status;
> +
> + struct gpio_descs *current_limit_gpios;
> + struct gpio_mapping *current_limit_map;
> + u32 current_limit_map_size;
> + u32 charge_current_limit;
> };
>
> static irqreturn_t gpio_charger_irq(int irq, void *devid)
> @@ -43,6 +54,35 @@ static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
> return power_supply_get_drvdata(psy);
> }
>
> +static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
> +{
> + struct gpio_mapping mapping;
> + int ndescs = gpio_charger->current_limit_gpios->ndescs;
> + struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
> + int i;
> +
> + if (!gpio_charger->current_limit_map_size)
> + return -EINVAL;
> +
> + for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
> + if (gpio_charger->current_limit_map[i].limit_ua <= val)
> + break;
> + }
> + mapping = gpio_charger->current_limit_map[i];
> +
> + for (i = 0; i < ndescs; i++) {
> + bool val = (mapping.gpiodata >> i) & 1;
> + gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
> + }
> +
> + gpio_charger->charge_current_limit = mapping.limit_ua;
> +
> + dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
> + gpio_charger->charge_current_limit, val);
> +
> + return 0;
> +}
> +
> static int gpio_charger_get_property(struct power_supply *psy,
> enum power_supply_property psp, union power_supply_propval *val)
> {
> @@ -58,6 +98,9 @@ static int gpio_charger_get_property(struct power_supply *psy,
> else
> val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + val->intval = gpio_charger->charge_current_limit;
> + break;
> default:
> return -EINVAL;
> }
> @@ -65,6 +108,34 @@ static int gpio_charger_get_property(struct power_supply *psy,
> return 0;
> }
>
> +static int gpio_charger_set_property(struct power_supply *psy,
> + enum power_supply_property psp, const union power_supply_propval *val)
> +{
> + struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + return set_charge_current_limit(gpio_charger, val->intval);
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int gpio_charger_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + return 1;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> static enum power_supply_type gpio_charger_get_type(struct device *dev)
> {
> const char *chargetype;
> @@ -112,9 +183,70 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
> return irq;
> }
>
> +static int init_charge_current_limit(struct device *dev,
> + struct gpio_charger *gpio_charger)
> +{
> + int i, len;
> + u32 cur_limit = U32_MAX;
> +
> + gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
> + "charge-current-limit", GPIOD_OUT_LOW);
> + if (IS_ERR(gpio_charger->current_limit_gpios)) {
> + dev_err(dev, "error getting current-limit GPIOs\n");
> + return PTR_ERR(gpio_charger->current_limit_gpios);
> + }
> +
> + if (!gpio_charger->current_limit_gpios)
> + return 0;
> +
> + len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
> + NULL, 0);
> + if (len < 0)
> + return len;
> +
> + if (len % 2) {
> + dev_err(dev, "invalid charge-current-limit-mapping length\n");
> + return -EINVAL;
> + }
> +
> + gpio_charger->current_limit_map = devm_kmalloc_array(dev,
> + len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
> + if (!gpio_charger->current_limit_map)
> + return -ENOMEM;
> +
> + gpio_charger->current_limit_map_size = len / 2;
> +
> + len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
> + (u32*) gpio_charger->current_limit_map, len);
> + if (len < 0)
> + return len;
> +
> + for (i=0; i < gpio_charger->current_limit_map_size; i++) {
> + if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
> + dev_err(dev, "invalid charge-current-limit-mapping\n");
> + return -EINVAL;
> + }
> +
> + cur_limit = gpio_charger->current_limit_map[i].limit_ua;
> + }
> +
> + /* default to smallest current limitation for safety reasons */
> + len = gpio_charger->current_limit_map_size - 1;
> + set_charge_current_limit(gpio_charger,
> + gpio_charger->current_limit_map[len].limit_ua);
> +
> + return 0;
> +}
> +
> +/*
> + * The entries will be overwritten by driver's probe routine depending
> + * on the available features. This list ensures, that the array is big
> + * enough for all optional features.
> + */
> static enum power_supply_property gpio_charger_properties[] = {
> POWER_SUPPLY_PROP_ONLINE,
> - POWER_SUPPLY_PROP_STATUS /* Must always be last in the array. */
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> };
>
> static int gpio_charger_probe(struct platform_device *pdev)
> @@ -128,6 +260,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
> int charge_status_irq;
> unsigned long flags;
> int ret;
> + int num_props = 0;
>
> if (!pdata && !dev->of_node) {
> dev_err(dev, "No platform data\n");
> @@ -137,18 +270,19 @@ static int gpio_charger_probe(struct platform_device *pdev)
> gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
> if (!gpio_charger)
> return -ENOMEM;
> + gpio_charger->dev = dev;
>
> /*
> * This will fetch a GPIO descriptor from device tree, ACPI or
> * boardfile descriptor tables. It's good to try this first.
> */
> - gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
> + gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
>
> /*
> * If this fails and we're not using device tree, try the
> * legacy platform data method.
> */
> - if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
> + if (!gpio_charger->gpiod && !dev->of_node) {
> /* Non-DT: use legacy GPIO numbers */
> if (!gpio_is_valid(pdata->gpio)) {
> dev_err(dev, "Invalid gpio pin in pdata\n");
> @@ -173,18 +307,38 @@ static int gpio_charger_probe(struct platform_device *pdev)
> return PTR_ERR(gpio_charger->gpiod);
> }
>
> + if (gpio_charger->gpiod &&
> + num_props < ARRAY_SIZE(gpio_charger_properties)) {
> + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
> + num_props++;
> + }
> +
> charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
> - gpio_charger->charge_status = charge_status;
> - if (IS_ERR(gpio_charger->charge_status))
> - return PTR_ERR(gpio_charger->charge_status);
> + if (IS_ERR(charge_status))
> + return PTR_ERR(charge_status);
> + if (charge_status && num_props < ARRAY_SIZE(gpio_charger_properties)) {
> + gpio_charger->charge_status = charge_status;
> + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
> + num_props++;
> + }
> +
> + ret = init_charge_current_limit(dev, gpio_charger);
> + if (ret < 0)
> + return ret;
> + if (gpio_charger->current_limit_map &&
> + num_props < ARRAY_SIZE(gpio_charger_properties)) {
> + gpio_charger_properties[num_props] =
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
> + num_props++;
> + }
>
> charger_desc = &gpio_charger->charger_desc;
> charger_desc->properties = gpio_charger_properties;
> - charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
> - /* Remove POWER_SUPPLY_PROP_STATUS from the supported properties. */
> - if (!gpio_charger->charge_status)
> - charger_desc->num_properties -= 1;
> + charger_desc->num_properties = num_props;
> charger_desc->get_property = gpio_charger_get_property;
> + charger_desc->set_property = gpio_charger_set_property;
> + charger_desc->property_is_writeable =
> + gpio_charger_property_is_writeable;
>
> psy_cfg.of_node = dev->of_node;
> psy_cfg.drv_data = gpio_charger;
> @@ -269,6 +423,6 @@ static struct platform_driver gpio_charger_driver = {
> module_platform_driver(gpio_charger_driver);
>
> MODULE_AUTHOR("Lars-Peter Clausen <lars@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");
> +MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
> MODULE_LICENSE("GPL");
> MODULE_ALIAS("platform:gpio-charger");
> --
> 2.26.2
>

Next message: Stephen Boyd: "Re: [PATCH V6 5/5] arm64: dts: ipq6018: Add support for apss pll"
Previous message: Laurent Pinchart: "Re: [PATCH v8 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]