[PATCH v3 09/14] mtd: spi-nor: core: add configuration register 2 read & write support

[Mason Yang]

Configuration register 2 is to set the device operation condition like
STR or DTR mode at address offset 0 and DQS mode at address offset 0x200.

Each device has various address offset for it's specific operatoin
setting.

Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
---
 drivers/mtd/spi-nor/core.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/core.h |  2 ++
 2 files changed, 80 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 642e3c0..117d117 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -347,6 +347,84 @@ int spi_nor_write_disable(struct spi_nor *nor)
 }
 
 /**
+ * spi_nor_read_cr2() - Read the Configuration Register 2.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @addr:	offset address to read.
+ * @cr2:	pointer to a DMA-able buffer where the value of the
+ *              Configuration Register 2  will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_read_cr2(struct spi_nor *nor, u32 addr, u8 *cr2)
+{
+	int ret;
+	u8 cmd = nor->params->rd_reg_cmd;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(cmd, 1),
+				   SPI_MEM_OP_ADDR(4, addr, 1),
+				   SPI_MEM_OP_DUMMY(4, 1),
+				   SPI_MEM_OP_DATA_IN(1, cr2, 1));
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		if (spi_nor_protocol_is_dtr(nor->reg_proto))
+			ret = -ENOTSUPP;
+		else
+			ret = nor->controller_ops->read_reg(nor, cmd, cr2, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d reading CR2\n", ret);
+
+	return ret;
+}
+
+/**
+ * spi_nor_write_cr2() - Write the Configuration Register 2.
+ * @nor:	pointer to 'struct spi_nor'.
+ * @addr:	offset address to write.
+ * @cr2:	pointer to a DMA-able buffer where the value of the
+ *              Configuratin Register 2 will be read.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_cr2(struct spi_nor *nor, u32 addr, u8 *cr2)
+{
+	int ret;
+	u8 cmd = nor->params->wr_reg_cmd;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(cmd, 1),
+				   SPI_MEM_OP_ADDR(4, addr, 1),
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_DATA_OUT(1, cr2, 1));
+
+		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		if (spi_nor_protocol_is_dtr(nor->reg_proto))
+			ret = -ENOTSUPP;
+		else
+			ret = nor->controller_ops->write_reg(nor, cmd, cr2, 1);
+	}
+
+	if (ret)
+		dev_dbg(nor->dev, "error %d write CFG Reg 2\n", ret);
+
+	return ret;
+}
+
+/**
  * spi_nor_read_sr() - Read the Status Register.
  * @nor:	pointer to 'struct spi_nor'.
  * @sr:		pointer to a DMA-able buffer where the value of the
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 101726c..91bc69a 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -438,6 +438,8 @@ void spi_nor_spimem_setup_op(const struct spi_nor *nor,
 			     const enum spi_nor_protocol proto);
 int spi_nor_write_enable(struct spi_nor *nor);
 int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_read_cr2(struct spi_nor *nor, u32 addr, u8 *cr2);
+int spi_nor_write_cr2(struct spi_nor *nor, u32 addr, u8 *cr2);
 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
 int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
-- 
1.9.1