[PATCH] PCI: aardvark: Don't touch PCIe registers if no card connected

[Pali RohÃr]

When there is no PCIe card connected and advk_pcie_rd_conf() or
advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
root bridge, the aardvark driver throws the following error message:

  advk-pcie d0070000.pcie: config read/write timed out

Obviously accessing PCIe registers of disconnected card is not possible.

Extend check in advk_pcie_valid_device() function for validating
availability of PCIe bus. If PCIe link is down, then the device is marked
as Not Found and the driver does not try to access these registers.

Signed-off-by: Pali RohÃr <pali@xxxxxxxxxx>
---
 drivers/pci/controller/pci-aardvark.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 90ff291c24f0..53a4cfd7d377 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -644,6 +644,9 @@ static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
 		return false;
 
+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+		return false;
+
 	return true;
 }
 
-- 
2.20.1