[RFC PATCH] spi: spi-cavium-thunderx: flag controller as half duplex

[Tim Harvey]

The OcteonTX (TX1/ThunderX) SPI controller does not support full
duplex transactions. Set the appropriate flag such that the spi
core will return -EINVAL on such transactions requested by chip
drivers.

This is an RFC as I need someone from Marvell/Cavium to confirm
if this driver is used for other silicon that does support
full duplex transfers (in which case we will need to identify
that we are running on the ThunderX arch before setting the flag).

Cc: Robert Richter <rrichter@xxxxxxxxxxx>
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
 drivers/spi/spi-cavium-thunderx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
index fd6b9ca..60c0d69 100644
--- a/drivers/spi/spi-cavium-thunderx.c
+++ b/drivers/spi/spi-cavium-thunderx.c
@@ -64,6 +64,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev,
 		p->sys_freq = SYS_FREQ_DEFAULT;
 	dev_info(dev, "Set system clock to %u\n", p->sys_freq);
 
+	master->flags = SPI_MASTER_HALF_DUPLEX;
 	master->num_chipselect = 4;
 	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
 			    SPI_LSB_FIRST | SPI_3WIRE;
-- 
2.7.4