Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

[Jonathan Marek]

On 5/28/20 11:05 PM, Bjorn Andersson wrote:
> On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
>
> > Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> >
> > Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> > few changes. Notably, the HDK865 dts has regulator config changed a bit based
> > on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
>
> Can you please elaborate on this discrepancy? I do remember seeing
> something odd when looking at this, but it seems like I didn't document
> it anywhere...
>
> Thanks,
> Bjorn

Mainly there's a few regulators with different min/max voltage values. 
For example with l16a, downstream has min/max 3024000/3304000 but 
upstream sm8250-mtp has 2704000/2960000. I also added l18a.

> > Jonathan Marek (6):
> >    arm64: dts: qcom: sm8150: add apps_smmu node
> >    arm64: dts: qcom: sm8250: add apps_smmu node
> >    arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
> >    arm64: dts: qcom: sm8250: Add USB and PHY device nodes
> >    arm64: dts: qcom: add sm8150 hdk dts
> >    arm64: dts: qcom: add sm8250 hdk dts
> >
> >   arch/arm64/boot/dts/qcom/Makefile       |   2 +
> >   arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
> >   arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
> >   arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
> >   arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
> >   5 files changed, 1384 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
> >   create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> >
> > --
> > 2.26.1