Re: [PATCH v2 1/5] uaccess: Add user_read_access_begin/end and user_write_access_begin/end

[Michael Ellerman]

On Fri, 2020-04-03 at 07:20:50 UTC, Christophe Leroy wrote:
> Some architectures like powerpc64 have the capability to separate
> read access and write access protection.
> For get_user() and copy_from_user(), powerpc64 only open read access.
> For put_user() and copy_to_user(), powerpc64 only open write access.
> But when using unsafe_get_user() or unsafe_put_user(),
> user_access_begin open both read and write.
> 
> Other architectures like powerpc book3s 32 bits only allow write
> access protection. And on this architecture protection is an heavy
> operation as it requires locking/unlocking per segment of 256Mbytes.
> On those architecture it is therefore desirable to do the unlocking
> only for write access. (Note that book3s/32 ranges from very old
> powermac from the 90's with powerpc 601 processor, till modern
> ADSL boxes with PowerQuicc II processors for instance so it
> is still worth considering.)
> 
> In order to avoid any risk based of hacking some variable parameters
> passed to user_access_begin/end that would allow hacking and
> leaving user access open or opening too much, it is preferable to
> use dedicated static functions that can't be overridden.
> 
> Add a user_read_access_begin and user_read_access_end to only open
> read access.
> 
> Add a user_write_access_begin and user_write_access_end to only open
> write access.
> 
> By default, when undefined, those new access helpers default on the
> existing user_access_begin and user_access_end.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
> Reviewed-by: Kees Cook <keescook@xxxxxxxxxxxx>

Applied to powerpc topic/uaccess, thanks.

https://git.kernel.org/powerpc/c/999a22890cb183b918e4372395d24426a755cef2

cheers