Re: [PATCH v2 03/14] dt-bindings: PCI: Add bindings for more Brcmstb chips

[Rob Herring]

On Tue, May 26, 2020 at 03:12:42PM -0400, Jim Quinlan wrote:
> From: Jim Quinlan <jquinlan@xxxxxxxxxxxx>
> 
> - Add compatible strings for three more Broadcom STB chips: 7278, 7216,
>   7211 (STB version of RPi4).
> - add new property 'brcm,scb-sizes'
> - add new property 'resets'
> - add new property 'reset-names'
> - allow 'ranges' and 'dma-ranges' to have more than one item and update
>   the example to show this.
> 
> Signed-off-by: Jim Quinlan <jquinlan@xxxxxxxxxxxx>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 40 +++++++++++++++++--
>  1 file changed, 36 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 8680a0f86c5a..66a7df45983d 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -14,7 +14,13 @@ allOf:
>  
>  properties:
>    compatible:
> -    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> +    items:
> +      - enum:

Don't need items here. Just change the const to enum.

> +          - brcm,bcm2711-pcie # The Raspberry Pi 4
> +          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
> +          - brcm,bcm7216-pcie # Broadcom 7216 Arm
> +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
>  
>    reg:
>      maxItems: 1
> @@ -34,10 +40,12 @@ properties:
>        - const: msi
>  
>    ranges:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 4
>  
>    dma-ranges:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 6
>  
>    clocks:
>      maxItems: 1
> @@ -58,8 +66,30 @@ properties:
>  
>    aspm-no-l0s: true
>  
> +  resets:
> +    description: for "brcm,bcm7216-pcie", must be a valid reset
> +      phandle pointing to the RESCAL reset controller provider node.
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> +  reset-names:
> +    items:
> +      - const: rescal

These are going to need to be an if/then schema if they only apply to 
certain compatible(s).

> +
> +  brcm,scb-sizes:
> +    description: (u32, u32) tuple giving the 64bit PCIe memory
> +      viewport size of a memory controller.  There may be up to
> +      three controllers, and each size must be a power of two
> +      with a size greater or equal to the amount of memory the
> +      controller supports.

This sounds like what dma-ranges should express?

If not, we do have 64-bit size if that what you need.

> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - items:
> +          minItems: 2
> +          maxItems: 6
> +
>  required:
>    - reg
> +  - ranges
>    - dma-ranges
>    - "#interrupt-cells"
>    - interrupts
> @@ -93,7 +123,9 @@ examples:
>                      msi-parent = <&pcie0>;
>                      msi-controller;
>                      ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> -                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> +                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
> +                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
>                      brcm,enable-ssc;
> +                    brcm,scb-sizes = <0x0 0x80000000 0x0 0x80000000>;
>              };
>      };
> -- 
> 2.17.1
>