Re: [PATCH 2/4] dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts

[Rob Herring]

On Thu, May 28, 2020 at 12:21:10PM -0700, Florian Fainelli wrote:
> BCM7211 supports wake-up interrupts in the form of optional interrupt
> lines, one per bank, plus the "all banks" interrupt line.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
>  .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt         | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> index dfc67b90591c..5682b2010e50 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> @@ -16,7 +16,9 @@ Required properties:
>    second cell is used to specify optional parameters:
>    - bit 0 specifies polarity (0 for normal, 1 for inverted)
>  - interrupts : The interrupt outputs from the controller. One interrupt per
> -  individual bank followed by the "all banks" interrupt.
> +  individual bank followed by the "all banks" interrupt. For BCM7211, an
> +  additional set of per-bank interrupt line and an "all banks" wake-up
> +  interrupt may be specified.

Is 'all banks' the name? Generally 'wakeup' is used for a wake up irq.

Rob