Re: [PATCH v2] devres: keep both device name and resource name in pretty name

[Andy Shevchenko]

On Mon, Jun 1, 2020 at 12:13 AM Vladimir Oltean <olteanv@xxxxxxxxx> wrote:
> On Mon, 1 Jun 2020 at 00:05, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> > On Sunday, May 31, 2020, Vladimir Oltean <olteanv@xxxxxxxxx> wrote:

> >> Sometimes debugging a device is easiest using devmem on its register
> >> map, and that can be seen with /proc/iomem. But some device drivers have
> >> many memory regions. Take for example a networking switch. Its memory
> >> map used to look like this in /proc/iomem:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >>   1fc000000-1fc3fffff : 0000:00:00.5
> >>     1fc010000-1fc01ffff : sys
> >>     1fc030000-1fc03ffff : rew
> >>     1fc060000-1fc0603ff : s2
> >>     1fc070000-1fc0701ff : devcpu_gcb
> >>     1fc080000-1fc0800ff : qs
> >>     1fc090000-1fc0900cb : ptp
> >>     1fc100000-1fc10ffff : port0
> >>     1fc110000-1fc11ffff : port1
> >>     1fc120000-1fc12ffff : port2
> >>     1fc130000-1fc13ffff : port3
> >>     1fc140000-1fc14ffff : port4
> >>     1fc150000-1fc15ffff : port5
> >>     1fc200000-1fc21ffff : qsys
> >>     1fc280000-1fc28ffff : ana
> >>
> >> But after the patch in Fixes: was applied, the information is now
> >> presented in a much more opaque way:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >>   1fc000000-1fc3fffff : 0000:00:00.5
> >>     1fc010000-1fc01ffff : 0000:00:00.5
> >>     1fc030000-1fc03ffff : 0000:00:00.5
> >>     1fc060000-1fc0603ff : 0000:00:00.5
> >>     1fc070000-1fc0701ff : 0000:00:00.5
> >>     1fc080000-1fc0800ff : 0000:00:00.5
> >>     1fc090000-1fc0900cb : 0000:00:00.5
> >>     1fc100000-1fc10ffff : 0000:00:00.5
> >>     1fc110000-1fc11ffff : 0000:00:00.5
> >>     1fc120000-1fc12ffff : 0000:00:00.5
> >>     1fc130000-1fc13ffff : 0000:00:00.5
> >>     1fc140000-1fc14ffff : 0000:00:00.5
> >>     1fc150000-1fc15ffff : 0000:00:00.5
> >>     1fc200000-1fc21ffff : 0000:00:00.5
> >>     1fc280000-1fc28ffff : 0000:00:00.5
> >>
> >> That patch made a fair comment that /proc/iomem might be confusing when
> >> it shows resources without an associated device, but we can do better
> >> than just hide the resource name altogether. Namely, we can print the
> >> device name _and_ the resource name. Like this:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >>   1fc000000-1fc3fffff : 0000:00:00.5
> >>     1fc010000-1fc01ffff : 0000:00:00.5 sys
> >>     1fc030000-1fc03ffff : 0000:00:00.5 rew
> >>     1fc060000-1fc0603ff : 0000:00:00.5 s2
> >>     1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb
> >>     1fc080000-1fc0800ff : 0000:00:00.5 qs
> >>     1fc090000-1fc0900cb : 0000:00:00.5 ptp
> >>     1fc100000-1fc10ffff : 0000:00:00.5 port0
> >>     1fc110000-1fc11ffff : 0000:00:00.5 port1
> >>     1fc120000-1fc12ffff : 0000:00:00.5 port2
> >>     1fc130000-1fc13ffff : 0000:00:00.5 port3
> >>     1fc140000-1fc14ffff : 0000:00:00.5 port4
> >>     1fc150000-1fc15ffff : 0000:00:00.5 port5
> >>     1fc200000-1fc21ffff : 0000:00:00.5 qsys
> >>     1fc280000-1fc28ffff : 0000:00:00.5 ana

> > All of this seems an ABI change.

> Yes, indeed. What should I understand from your comment though?

You effectively break an ABI.

-- 
With Best Regards,
Andy Shevchenko