[PATCH 5.6 161/177] bnxt_en: fix firmware message length endianness

[Greg Kroah-Hartman]

From: Edwin Peer <edwin.peer@xxxxxxxxxxxx>

commit 2a5a8800fa915bd9bc272c91ca64728e6aa84c0a upstream.

The explicit mask and shift is not the appropriate way to parse fields
out of a little endian struct. The length field is internally __le16
and the strategy employed only happens to work on little endian machines
because the offset used is actually incorrect (length is at offset 6).

Also remove the related and no longer used definitions from bnxt.h.

Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.")
Signed-off-by: Edwin Peer <edwin.peer@xxxxxxxxxxxx>
Signed-off-by: Michael Chan <michael.chan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |   14 ++++----------
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |    5 -----
 2 files changed, 4 insertions(+), 15 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4184,14 +4184,12 @@ static int bnxt_hwrm_do_send_msg(struct
 	int i, intr_process, rc, tmo_count;
 	struct input *req = msg;
 	u32 *data = msg;
-	__le32 *resp_len;
 	u8 *valid;
 	u16 cp_ring_id, len = 0;
 	struct hwrm_err_output *resp = bp->hwrm_cmd_resp_addr;
 	u16 max_req_len = BNXT_HWRM_MAX_REQ_LEN;
 	struct hwrm_short_input short_input = {0};
 	u32 doorbell_offset = BNXT_GRCPF_REG_CHIMP_COMM_TRIGGER;
-	u8 *resp_addr = (u8 *)bp->hwrm_cmd_resp_addr;
 	u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM;
 	u16 dst = BNXT_HWRM_CHNL_CHIMP;
 
@@ -4209,7 +4207,6 @@ static int bnxt_hwrm_do_send_msg(struct
 		bar_offset = BNXT_GRCPF_REG_KONG_COMM;
 		doorbell_offset = BNXT_GRCPF_REG_KONG_COMM_TRIGGER;
 		resp = bp->hwrm_cmd_kong_resp_addr;
-		resp_addr = (u8 *)bp->hwrm_cmd_kong_resp_addr;
 	}
 
 	memset(resp, 0, PAGE_SIZE);
@@ -4278,7 +4275,6 @@ static int bnxt_hwrm_do_send_msg(struct
 	tmo_count = HWRM_SHORT_TIMEOUT_COUNTER;
 	timeout = timeout - HWRM_SHORT_MIN_TIMEOUT * HWRM_SHORT_TIMEOUT_COUNTER;
 	tmo_count += DIV_ROUND_UP(timeout, HWRM_MIN_TIMEOUT);
-	resp_len = (__le32 *)(resp_addr + HWRM_RESP_LEN_OFFSET);
 
 	if (intr_process) {
 		u16 seq_id = bp->hwrm_intr_seq_id;
@@ -4306,9 +4302,8 @@ static int bnxt_hwrm_do_send_msg(struct
 					   le16_to_cpu(req->req_type));
 			return -EBUSY;
 		}
-		len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >>
-		      HWRM_RESP_LEN_SFT;
-		valid = resp_addr + len - 1;
+		len = le16_to_cpu(resp->resp_len);
+		valid = ((u8 *)resp) + len - 1;
 	} else {
 		int j;
 
@@ -4319,8 +4314,7 @@ static int bnxt_hwrm_do_send_msg(struct
 			 */
 			if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state))
 				return -EBUSY;
-			len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >>
-			      HWRM_RESP_LEN_SFT;
+			len = le16_to_cpu(resp->resp_len);
 			if (len)
 				break;
 			/* on first few passes, just barely sleep */
@@ -4342,7 +4336,7 @@ static int bnxt_hwrm_do_send_msg(struct
 		}
 
 		/* Last byte of resp contains valid bit */
-		valid = resp_addr + len - 1;
+		valid = ((u8 *)resp) + len - 1;
 		for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) {
 			/* make sure we read from updated DMA memory */
 			dma_rmb();
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -654,11 +654,6 @@ struct nqe_cn {
 #define HWRM_CMD_TIMEOUT		(bp->hwrm_cmd_timeout)
 #define HWRM_RESET_TIMEOUT		((HWRM_CMD_TIMEOUT) * 4)
 #define HWRM_COREDUMP_TIMEOUT		((HWRM_CMD_TIMEOUT) * 12)
-#define HWRM_RESP_ERR_CODE_MASK		0xffff
-#define HWRM_RESP_LEN_OFFSET		4
-#define HWRM_RESP_LEN_MASK		0xffff0000
-#define HWRM_RESP_LEN_SFT		16
-#define HWRM_RESP_VALID_MASK		0xff000000
 #define BNXT_HWRM_REQ_MAX_SIZE		128
 #define BNXT_HWRM_REQS_PER_PAGE		(BNXT_PAGE_SIZE /	\
 					 BNXT_HWRM_REQ_MAX_SIZE)