[PATCH v5 09/11] PCI: qcom: Add ipq8064 rev2 variant
From: Ansuel Smith
Date: Tue Jun 02 2020 - 07:55:01 EST
Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit
different offset based on the revision.
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2cd6d1456210..259b627bf890 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -366,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
val &= ~BIT(0);
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") ||
+ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
@@ -1464,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
--
2.25.1