Re: [PATCH v3 2/6] PCI: uniphier: Add misc interrupt handler to invoke PME and AER

From: Marc Zyngier
Date: Wed Jun 03 2020 - 07:22:58 EST


On 2020-06-03 09:54, Kunihiko Hayashi wrote:
The misc interrupts consisting of PME, AER, and Link event, is handled
by INTx handler, however, these interrupts should be also handled by
MSI handler.

This adds the function uniphier_pcie_misc_isr() that handles misc
intterupts, which is called from both INTx and MSI handlers.

interrupts

This function detects PME and AER interrupts with the status register,
and invoke PME and AER drivers related to INTx or MSI.

And this sets the mask for misc interrupts from INTx if MSI is enabled
and sets the mask for misc interrupts from MSI if MSI is disabled.

Cc: Marc Zyngier <maz@xxxxxxxxxx>
Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
Cc: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-uniphier.c | 53 +++++++++++++++++++++++-------
1 file changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c
b/drivers/pci/controller/dwc/pcie-uniphier.c
index a5401a0..a8dda39 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -44,7 +44,9 @@
#define PCL_SYS_AUX_PWR_DET BIT(8)

#define PCL_RCV_INT 0x8108
+#define PCL_RCV_INT_ALL_INT_MASK GENMASK(28, 25)
#define PCL_RCV_INT_ALL_ENABLE GENMASK(20, 17)
+#define PCL_RCV_INT_ALL_MSI_MASK GENMASK(12, 9)
#define PCL_CFG_BW_MGT_STATUS BIT(4)
#define PCL_CFG_LINK_AUTO_BW_STATUS BIT(3)
#define PCL_CFG_AER_RC_ERR_MSI_STATUS BIT(2)
@@ -167,7 +169,15 @@ static void uniphier_pcie_stop_link(struct dw_pcie *pci)

static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
{
- writel(PCL_RCV_INT_ALL_ENABLE, priv->base + PCL_RCV_INT);
+ u32 val;
+
+ val = PCL_RCV_INT_ALL_ENABLE;
+ if (pci_msi_enabled())
+ val |= PCL_RCV_INT_ALL_INT_MASK;
+ else
+ val |= PCL_RCV_INT_ALL_MSI_MASK;
+
+ writel(val, priv->base + PCL_RCV_INT);
writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
}

@@ -231,28 +241,48 @@ static const struct irq_domain_ops
uniphier_intx_domain_ops = {
.map = uniphier_pcie_intx_map,
};

-static void uniphier_pcie_irq_handler(struct irq_desc *desc)
+static void uniphier_pcie_misc_isr(struct pcie_port *pp)
{
- struct pcie_port *pp = irq_desc_get_handler_data(desc);
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned long reg;
- u32 val, bit, virq;
+ u32 val, virq;

- /* INT for debug */
val = readl(priv->base + PCL_RCV_INT);

if (val & PCL_CFG_BW_MGT_STATUS)
dev_dbg(pci->dev, "Link Bandwidth Management Event\n");
+
if (val & PCL_CFG_LINK_AUTO_BW_STATUS)
dev_dbg(pci->dev, "Link Autonomous Bandwidth Event\n");
- if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
- dev_dbg(pci->dev, "Root Error\n");
- if (val & PCL_CFG_PME_MSI_STATUS)
- dev_dbg(pci->dev, "PME Interrupt\n");
+
+ if (pci_msi_enabled()) {

This checks whether the kernel supports MSIs. Not that they are
enabled in your controller. Is that really what you want to do?

+ if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS) {
+ dev_dbg(pci->dev, "Root Error Status\n");
+ virq = irq_linear_revmap(pp->irq_domain, 0);
+ generic_handle_irq(virq);
+ }
+
+ if (val & PCL_CFG_PME_MSI_STATUS) {
+ dev_dbg(pci->dev, "PME Interrupt\n");
+ virq = irq_linear_revmap(pp->irq_domain, 0);
+ generic_handle_irq(virq);
+ }

These two cases do the exact same thing, calling the same interrupt.
What is the point of dealing with them independently?

+ }

writel(val, priv->base + PCL_RCV_INT);
+}
+
+static void uniphier_pcie_irq_handler(struct irq_desc *desc)
+{
+ struct pcie_port *pp = irq_desc_get_handler_data(desc);
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned long reg;
+ u32 val, bit, virq;
+
+ /* misc interrupt */
+ uniphier_pcie_misc_isr(pp);

This is a chained handler called outside of a chained_irq_enter/exit
block. It isn't acceptable.


/* INTx */
chained_irq_enter(chip, desc);
@@ -330,6 +360,7 @@ static int uniphier_pcie_host_init(struct pcie_port *pp)

static const struct dw_pcie_host_ops uniphier_pcie_host_ops = {
.host_init = uniphier_pcie_host_init,
+ .msi_host_isr = uniphier_pcie_misc_isr,
};

static int uniphier_add_pcie_port(struct uniphier_pcie_priv *priv,

Thanks,

M.
--
Jazz is not dead. It just smells funny...