[RESEND v7 0/6] clockevent: add low power STM32 timer
From: Benjamin Gaignard
Date: Wed Jun 03 2020 - 08:56:22 EST
This series add low power timer as boadcast clockevent device.
Low power timer could runs even when CPUs are in idle mode and
could wakeup them.
Lee has acked the MFD part.
Clocksource driver still need to be reviewed by maintainers.
Add missing part of the bindings to describe interrupt.
version 7 resend:
- with Daniel ack for driver patch
- with Rob review for bindings patch
version 7:
- rebased on top of v5.7-rc2
version 6:
- simplify binding, DT and code to use only one interrupt
version 5:
- document interrupts and interrupt-names bindings
- use a different wake up interrupt
- add device-tree patch
- make STM32MP157 select low power timer configuration flag
- enable fast_io in regmap configuration
version 4:
- move defines in mfd/stm32-lptimer.h
- change compatible and subnode names
- document wakeup-source property
- reword commit message
- make driver Kconfig depends of MFD_STM32_LPTIMER
- remove useless include
- remove rate and clk fields from the private structure
- to add comments about the registers sequence in stm32_clkevent_lp_set_timer
- rework probe function and use devm_request_irq()
- do not allow module to be removed
version 3:
- fix timer set sequence
- don't forget to free irq on remove function
- use devm_kzalloc to simplify errors handling in probe function
version 2:
- stm32 clkevent driver is now a child of the stm32 lp timer node
- add a probe function and adpat the driver to use regmap provide
by it parent
- stop using timer_of helpers
Benjamin Gaignard (6):
dt-bindings: mfd: Document STM32 low power timer bindings
ARM: dts: stm32: Add timer subnodes on stm32mp15 SoCs
mfd: stm32: Add defines to be used for clkevent purpose
mfd: stm32: enable regmap fast_io for stm32-lptimer
clocksource: Add Low Power STM32 timers driver
ARM: mach-stm32: select low power timer for STM32MP157
.../devicetree/bindings/mfd/st,stm32-lptimer.yaml | 5 +
arch/arm/boot/dts/stm32mp151.dtsi | 35 ++++
arch/arm/mach-stm32/Kconfig | 1 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-stm32-lp.c | 221 +++++++++++++++++++++
drivers/mfd/stm32-lptimer.c | 1 +
include/linux/mfd/stm32-lptimer.h | 5 +
8 files changed, 273 insertions(+)
create mode 100644 drivers/clocksource/timer-stm32-lp.c
--
2.15.0