Re: [PATCH v3 105/105] ARM: dts: bcm2711: Enable the display pipeline

[Stefan Wahren]

Hi Maxime,

Am 27.05.20 um 17:49 schrieb Maxime Ripard:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts |  46 +++++++++++-
>  arch/arm/boot/dts/bcm2711.dtsi        | 115 ++++++++++++++++++++++++++-
>  2 files changed, 160 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index 222d7825e1ab..c4a650ea4e21 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -231,3 +231,49 @@
>  &vchiq {
>  	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>  };
> +
> +&vc4 {
> +	status = "okay";
> +};
> +
> +&pixelvalve0 {
> +	status = "okay";
> +};
> +
> +&pixelvalve1 {
> +	status = "okay";
> +};
> +
> +&pixelvalve2 {
> +	status = "okay";
> +};
> +
> +&pixelvalve4 {
> +	status = "okay";
> +};
> +
> +&vec {
> +	status = "disabled";
> +};
> +
> +&hdmi0 {
> +	clocks = <&firmware_clocks 13>, <&dvp 0>;
> +	status = "okay";
> +};
> +
> +&ddc0 {
> +	status = "okay";
> +};
> +
> +&hdmi1 {
> +	clocks = <&firmware_clocks 13>, <&dvp 1>;
> +	status = "okay";
> +};
> +
> +&ddc1 {
> +	status = "okay";
> +};
> +
> +&hvs {
> +	clocks = <&firmware_clocks 4>;
> +};

it would be nice to have these references in alphabetical order.

Regards