Acer TravelMate 5735Z: atkbd serio0: Unknown key pressed (translated set 2, code 0x93 on isa0060/serio0)
From: Paul Menzel
Date: Thu Jun 04 2020 - 04:17:37 EST
Dear Linux folks,
Using Debian Sid/unstable with Linux 5.6.14 on an (old) Acer TravelMate
5735Z, pressing the WIFI enable/disable function key works, and GNOME
even shows the OSD notification.
But Linux still logs this key as unknown.
[ 1595.795162] atkbd serio0: Unknown key pressed (translated set 2,
code 0x93 on isa0060/serio0).
[ 1595.795167] atkbd serio0: Use 'setkeycodes e013 <keycode>' to
make it known.
[ 1595.801375] atkbd serio0: Unknown key released (translated set
2, code 0x93 on isa0060/serio0).
[ 1595.801380] atkbd serio0: Use 'setkeycodes e013 <keycode>' to
make it known.
Can this be fixed upstream, and if so, where, or should these messages
be ignored?
Kind regards,
Paul
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 5.6.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 9.3.0 (Debian 9.3.0-13)) #1 SMP Debian 5.6.14-1 (2020-05-23)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-2-amd64 root=UUID=e17cec4f-d2b8-4cc3-bd39-39a10ed422f4 ro quiet noisapnp cryptomgr.notests random.trust_cpu=on acpi_backlight=native
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb86bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb86c000-0x00000000bb8befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb8bf000-0x00000000bb981fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb982000-0x00000000bb9befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb9bf000-0x00000000bb9e8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb9e9000-0x00000000bb9fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb9ff000-0x00000000bb9fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bba00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Acer TravelMate 5735Z/BA51_MV, BIOS V1.14 07/26/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.219 MHz processor
[ 0.004010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.004012] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.004019] last_pfn = 0xbba00 max_arch_pfn = 0x400000000
[ 0.004026] MTRR default type: uncachable
[ 0.004026] MTRR fixed ranges enabled:
[ 0.004028] 00000-9FFFF write-back
[ 0.004029] A0000-BFFFF uncachable
[ 0.004031] C0000-DFFFF write-protect
[ 0.004032] E0000-EFFFF uncachable
[ 0.004033] F0000-FFFFF write-protect
[ 0.004034] MTRR variable ranges enabled:
[ 0.004035] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.004037] 1 base 0FFFC0000 mask FFFFE0000 uncachable
[ 0.004038] 2 base 000000000 mask F80000000 write-back
[ 0.004040] 3 base 080000000 mask FC0000000 write-back
[ 0.004041] 4 base 0BC000000 mask FFC000000 uncachable
[ 0.004042] 5 base 0BBC00000 mask FFFC00000 uncachable
[ 0.004044] 6 base 0BBA00000 mask FFFE00000 uncachable
[ 0.004044] 7 disabled
[ 0.004603] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.017995] BRK [0xab201000, 0xab201fff] PGTABLE
[ 0.017999] BRK [0xab202000, 0xab202fff] PGTABLE
[ 0.018001] BRK [0xab203000, 0xab203fff] PGTABLE
[ 0.018042] BRK [0xab204000, 0xab204fff] PGTABLE
[ 0.018044] BRK [0xab205000, 0xab205fff] PGTABLE
[ 0.018190] BRK [0xab206000, 0xab206fff] PGTABLE
[ 0.018231] BRK [0xab207000, 0xab207fff] PGTABLE
[ 0.018373] RAMDISK: [mem 0x370a1000-0x37847fff]
[ 0.018381] ACPI: Early table checksum verification disabled
[ 0.018386] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.018390] ACPI: XSDT 0x00000000BB9FE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.018397] ACPI: FACP 0x00000000BB9FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018404] ACPI: DSDT 0x00000000BB9EB000 00C119 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018408] ACPI: FACS 0x00000000BB98F000 000040
[ 0.018412] ACPI: FACS 0x00000000BB98F000 000040
[ 0.018415] ACPI: HPET 0x00000000BB9FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018419] ACPI: APIC 0x00000000BB9FB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018422] ACPI: MCFG 0x00000000BB9FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018426] ACPI: ASF! 0x00000000BB9F9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018430] ACPI: SLIC 0x00000000BB9F8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018434] ACPI: BOOT 0x00000000BB9EA000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.018438] ACPI: SSDT 0x00000000BB9E9000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.018450] ACPI: Local APIC address 0xfee00000
[ 0.018557] No NUMA configuration found
[ 0.018558] Faking a node at [mem 0x0000000000000000-0x00000000bb9fffff]
[ 0.018562] NODE_DATA(0) allocated [mem 0xbb9e4000-0xbb9e8fff]
[ 0.018602] Zone ranges:
[ 0.018603] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018604] DMA32 [mem 0x0000000001000000-0x00000000bb9fffff]
[ 0.018605] Normal empty
[ 0.018606] Device empty
[ 0.018607] Movable zone start for each node
[ 0.018608] Early memory node ranges
[ 0.018609] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.018611] node 0: [mem 0x0000000000100000-0x00000000bb86bfff]
[ 0.018612] node 0: [mem 0x00000000bb8bf000-0x00000000bb981fff]
[ 0.018613] node 0: [mem 0x00000000bb9bf000-0x00000000bb9e8fff]
[ 0.018614] node 0: [mem 0x00000000bb9ff000-0x00000000bb9fffff]
[ 0.019293] Zeroed struct page in unavailable ranges: 18185 pages
[ 0.019296] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bb9fffff]
[ 0.019299] On node 0 totalpages: 768247
[ 0.019301] DMA zone: 64 pages used for memmap
[ 0.019302] DMA zone: 21 pages reserved
[ 0.019303] DMA zone: 3997 pages, LIFO batch:0
[ 0.019468] DMA32 zone: 11944 pages used for memmap
[ 0.019469] DMA32 zone: 764250 pages, LIFO batch:63
[ 0.021865] Reserving Intel graphics memory at [mem 0xbc000000-0xbfffffff]
[ 0.022183] ACPI: PM-Timer IO Port: 0x408
[ 0.022186] ACPI: Local APIC address 0xfee00000
[ 0.022207] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.022211] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.022214] ACPI: IRQ0 used by override.
[ 0.022216] ACPI: IRQ9 used by override.
[ 0.022218] Using ACPI (MADT) for SMP configuration information
[ 0.022220] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.022227] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.022255] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.022257] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.022258] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.022259] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.022261] PM: hibernation: Registered nosave memory: [mem 0xbb86c000-0xbb8befff]
[ 0.022262] PM: hibernation: Registered nosave memory: [mem 0xbb982000-0xbb9befff]
[ 0.022264] PM: hibernation: Registered nosave memory: [mem 0xbb9e9000-0xbb9fefff]
[ 0.022267] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.022269] Booting paravirtualized kernel on bare hardware
[ 0.022273] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028306] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.029559] percpu: Embedded 55 pages/cpu s188120 r8192 d28968 u524288
[ 0.029570] pcpu-alloc: s188120 r8192 d28968 u524288 alloc=1*2097152
[ 0.029572] pcpu-alloc: [0] 0 1 2 3
[ 0.029609] Built 1 zonelists, mobility grouping on. Total pages: 756218
[ 0.029610] Policy zone: DMA32
[ 0.029613] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.0-2-amd64 root=UUID=e17cec4f-d2b8-4cc3-bd39-39a10ed422f4 ro quiet noisapnp cryptomgr.notests random.trust_cpu=on acpi_backlight=native
[ 0.031657] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.032644] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.032723] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.040927] Memory: 261664K/3072988K available (10243K kernel code, 1285K rwdata, 3976K rodata, 1612K init, 1976K bss, 88812K reserved, 0K cma-reserved)
[ 0.040938] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[ 0.041125] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041148] Kernel/User page tables isolation: enabled
[ 0.041177] ftrace: allocating 34646 entries in 136 pages
[ 0.059904] ftrace: allocated 136 pages with 2 groups
[ 0.060096] rcu: Hierarchical RCU implementation.
[ 0.060098] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.060100] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.060101] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.064162] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.064444] Console: colour dummy device 80x25
[ 0.064456] printk: console [tty0] enabled
[ 0.064484] ACPI: Core revision 20200110
[ 0.064626] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.064645] APIC: Switch to symmetric I/O mode setup
[ 0.065074] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084644] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2111e02a9ce, max_idle_ns: 440795253379 ns
[ 0.084650] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.43 BogoMIPS (lpj=9176876)
[ 0.084653] pid_max: default: 32768 minimum: 301
[ 0.084697] LSM: Security Framework initializing
[ 0.084706] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.084735] AppArmor: AppArmor initialized
[ 0.084738] TOMOYO Linux initialized
[ 0.084788] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.084817] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.085204] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.085208] process: using mwait in idle threads
[ 0.085212] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.085213] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.085219] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.085221] Spectre V2 : Mitigation: Full generic retpoline
[ 0.085222] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.085223] Speculative Store Bypass: Vulnerable
[ 0.085228] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.085403] Freeing SMP alternatives memory: 32K
[ 0.200514] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4500 @ 2.30GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.200646] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.200646] ... version: 2
[ 0.200646] ... bit width: 40
[ 0.200646] ... generic registers: 2
[ 0.200646] ... value mask: 000000ffffffffff
[ 0.200646] ... max period: 000000007fffffff
[ 0.200646] ... fixed-purpose events: 3
[ 0.200646] ... event mask: 0000000700000003
[ 0.200646] rcu: Hierarchical SRCU implementation.
[ 0.200646] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.200646] smp: Bringing up secondary CPUs ...
[ 0.200646] x86: Booting SMP configuration:
[ 0.200646] .... node #0, CPUs: #1
[ 0.204722] smp: Brought up 1 node, 2 CPUs
[ 0.204722] smpboot: Max logical packages: 2
[ 0.204722] smpboot: Total of 2 processors activated (9176.87 BogoMIPS)
[ 0.208694] node 0 initialised, 680628 pages in 4ms
[ 0.209007] devtmpfs: initialized
[ 0.209007] x86/mm: Memory block size: 128MB
[ 0.212683] PM: Registering ACPI NVS region [mem 0xbb982000-0xbb9befff] (249856 bytes)
[ 0.212770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.212776] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.212881] pinctrl core: initialized pinctrl subsystem
[ 0.213026] thermal_sys: Registered thermal governor 'fair_share'
[ 0.213027] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.213028] thermal_sys: Registered thermal governor 'step_wise'
[ 0.213030] thermal_sys: Registered thermal governor 'user_space'
[ 0.213209] NET: Registered protocol family 16
[ 0.213339] audit: initializing netlink subsys (disabled)
[ 0.213358] audit: type=2000 audit(1590900577.148:1): state=initialized audit_enabled=0 res=1
[ 0.213358] cpuidle: using governor ladder
[ 0.213358] cpuidle: using governor menu
[ 0.213358] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.213358] Simple Boot Flag at 0x44 set to 0x1
[ 0.213358] ACPI: bus type PCI registered
[ 0.213358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.213358] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.213358] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.213358] PCI: Using configuration type 1 for base access
[ 0.213358] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.213358] mtrr: probably your BIOS does not setup all CPUs.
[ 0.213358] mtrr: corrected configuration.
[ 0.214452] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.214452] alg: self-tests disabled
[ 0.216783] ACPI: Added _OSI(Module Device)
[ 0.216785] ACPI: Added _OSI(Processor Device)
[ 0.216786] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.216787] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216789] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.216790] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.216791] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.224407] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.225713] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.226083] ACPI: Dynamic OEM Table Load:
[ 0.226090] ACPI: SSDT 0xFFFF93CCF87D5C00 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.226896] ACPI: Dynamic OEM Table Load:
[ 0.226902] ACPI: SSDT 0xFFFF93CC7786C800 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.227913] ACPI: Dynamic OEM Table Load:
[ 0.227918] ACPI: SSDT 0xFFFF93CCEB270A00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.228634] ACPI: Dynamic OEM Table Load:
[ 0.228639] ACPI: SSDT 0xFFFF93CCF87EAE40 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.229619] ACPI: EC: EC started
[ 0.229621] ACPI: EC: interrupt blocked
[ 0.236753] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.236756] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
[ 0.236757] ACPI: Interpreter enabled
[ 0.236789] ACPI: (supports S0 S3 S4 S5)
[ 0.236791] ACPI: Using IOAPIC for interrupt routing
[ 0.236829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.237104] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.244994] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.245001] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.245007] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.245022] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.245505] PCI host bridge to bus 0000:00
[ 0.245508] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.245509] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.245511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.245513] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.245515] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.245527] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.245559] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.245561] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.245666] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.245680] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.245688] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.245693] pci 0000:00:02.0: reg 0x20: [io 0x4110-0x4117]
[ 0.245827] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.245840] pci 0000:00:02.1: reg 0x10: [mem 0xd3400000-0xd34fffff 64bit]
[ 0.245999] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.246080] pci 0000:00:1a.0: reg 0x20: [io 0x40e0-0x40ff]
[ 0.246269] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.246347] pci 0000:00:1a.1: reg 0x20: [io 0x40c0-0x40df]
[ 0.246531] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.252649] pci 0000:00:1a.7: reg 0x10: [mem 0xd6704c00-0xd6704fff]
[ 0.274481] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.274617] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.274645] pci 0000:00:1b.0: reg 0x10: [mem 0xd6700000-0xd6703fff 64bit]
[ 0.274744] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.274877] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.274994] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.275138] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.275260] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.275397] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.275520] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.275672] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.275752] pci 0000:00:1d.0: reg 0x20: [io 0x40a0-0x40bf]
[ 0.275942] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.276676] pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f]
[ 0.276863] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.276939] pci 0000:00:1d.2: reg 0x20: [io 0x4060-0x407f]
[ 0.277120] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.277185] pci 0000:00:1d.3: reg 0x20: [io 0x4040-0x405f]
[ 0.277372] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.284213] pci 0000:00:1d.7: reg 0x10: [mem 0xd6704800-0xd6704bff]
[ 0.304703] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.304845] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.305043] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.305296] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.305320] pci 0000:00:1f.2: reg 0x10: [io 0x4108-0x410f]
[ 0.305329] pci 0000:00:1f.2: reg 0x14: [io 0x411c-0x411f]
[ 0.305338] pci 0000:00:1f.2: reg 0x18: [io 0x4100-0x4107]
[ 0.305347] pci 0000:00:1f.2: reg 0x1c: [io 0x4118-0x411b]
[ 0.305357] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.305366] pci 0000:00:1f.2: reg 0x24: [mem 0xd6704000-0xd67047ff]
[ 0.305420] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.305540] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.305563] pci 0000:00:1f.3: reg 0x10: [mem 0xd6705000-0xd67050ff 64bit]
[ 0.305589] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.305790] acpiphp: Slot [1] registered
[ 0.305796] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.305800] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.305804] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.305811] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.305914] pci 0000:04:00.0: [14e4:4357] type 00 class 0x028000
[ 0.305963] pci 0000:04:00.0: reg 0x10: [mem 0xd4600000-0xd4603fff 64bit]
[ 0.306045] pci 0000:04:00.0: enabling Extended Tags
[ 0.306157] pci 0000:04:00.0: supports D1 D2
[ 0.306159] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.306339] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.306344] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.306347] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.306353] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.306430] pci 0000:05:00.0: [14e4:1692] type 00 class 0x020000
[ 0.306479] pci 0000:05:00.0: reg 0x10: [mem 0xd3500000-0xd350ffff 64bit]
[ 0.306565] pci 0000:05:00.0: enabling Extended Tags
[ 0.306683] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.306858] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.306862] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.306866] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.306873] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.306898] pci_bus 0000:06: extended config space not accessible
[ 0.306971] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.306983] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.306985] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.306986] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.306988] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.412897] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.412970] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.413041] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.413110] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.413180] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.413250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.413320] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.413389] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.414209] ACPI: EC: interrupt unblocked
[ 0.414222] ACPI: EC: event unblocked
[ 0.414228] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.414230] ACPI: EC: GPE=0x1c
[ 0.414232] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.414321] iommu: Default domain type: Translated
[ 0.414348] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.414348] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.414348] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.414348] vgaarb: loaded
[ 0.414348] EDAC MC: Ver: 3.0.0
[ 0.414348] PCI: Using ACPI for IRQ routing
[ 0.414875] PCI: pci_cache_line_size set to 64 bytes
[ 0.414981] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.414983] e820: reserve RAM buffer [mem 0xbb86c000-0xbbffffff]
[ 0.414984] e820: reserve RAM buffer [mem 0xbb982000-0xbbffffff]
[ 0.414985] e820: reserve RAM buffer [mem 0xbb9e9000-0xbbffffff]
[ 0.414986] e820: reserve RAM buffer [mem 0xbba00000-0xbbffffff]
[ 0.416650] NetLabel: Initializing
[ 0.416650] NetLabel: domain hash size = 128
[ 0.416650] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.416650] NetLabel: unlabeled traffic allowed by default
[ 0.416650] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.416650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.416650] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.417683] clocksource: Switched to clocksource tsc-early
[ 0.434832] VFS: Disk quotas dquot_6.6.0
[ 0.434858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.435056] AppArmor: AppArmor Filesystem Enabled
[ 0.435085] pnp: PnP ACPI init
[ 0.543470] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff]
[ 0.543543] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.543545] system 00:00: [io 0x0610] has been reserved
[ 0.543547] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.543549] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.543550] system 00:00: [io 0x0820-0x0823] has been reserved
[ 0.543552] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.543554] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.543556] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.543559] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.543561] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.543563] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.543565] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.543567] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.543569] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.543571] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.543573] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.543582] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543654] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.543737] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.543834] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1d SYN1b00 SYN0002 PNP0f13 (active)
[ 0.543995] pnp: PnP ACPI: found 4 devices
[ 0.550477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.550538] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.550543] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.550548] pci 0000:00:1c.0: bridge window [mem 0xd5700000-0xd66fffff]
[ 0.550552] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.550559] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.550562] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.550567] pci 0000:00:1c.1: bridge window [mem 0xd4600000-0xd56fffff]
[ 0.550571] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.550577] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.550580] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.550585] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd45fffff]
[ 0.550589] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.550596] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.550609] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.550611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.550612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.550614] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.550616] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.550617] pci_bus 0000:02: resource 1 [mem 0xd5700000-0xd66fffff]
[ 0.550619] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.550620] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.550622] pci_bus 0000:04: resource 1 [mem 0xd4600000-0xd56fffff]
[ 0.550623] pci_bus 0000:04: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.550625] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.550627] pci_bus 0000:05: resource 1 [mem 0xd3500000-0xd45fffff]
[ 0.550628] pci_bus 0000:05: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
[ 0.550630] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.550631] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.550633] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.550635] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.550790] NET: Registered protocol family 2
[ 0.550995] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.551011] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.551110] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.551311] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.551411] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.551443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.551665] NET: Registered protocol family 1
[ 0.551675] NET: Registered protocol family 44
[ 0.551698] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.575431] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x645 took 22466 usecs
[ 0.599416] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x645 took 22260 usecs
[ 0.599471] PCI: CLS 64 bytes, default 64
[ 0.599537] Trying to unpack rootfs image as initramfs...
[ 0.645572] Freeing initrd memory: 7836K
[ 0.646444] Initialise system trusted keyrings
[ 0.646457] Key type blacklist registered
[ 0.646552] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.648815] zbud: loaded
[ 0.649071] Platform Keyring initialized
[ 0.649074] Key type asymmetric registered
[ 0.649076] Asymmetric key parser 'x509' registered
[ 0.649087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.649177] io scheduler mq-deadline registered
[ 0.649331] pcieport 0000:00:1c.0: enabling device (0001 -> 0003)
[ 0.650567] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.650586] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.650586] vesafb: scrolling: redraw
[ 0.650588] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.650612] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[ 0.650769] Console: switching to colour frame buffer device 128x48
[ 0.674622] fb0: VESA VGA frame buffer device
[ 0.674646] intel_idle: MWAIT substates: 0x2220
[ 0.674761] Monitor-Mwait will be used to enter C-1 state
[ 0.674767] Monitor-Mwait will be used to enter C-2 state
[ 0.674771] ACPI: \_PR_.CPU0: Found 2 idle states
[ 0.674772] intel_idle: v0.4.1 model 0x17
[ 0.674881] intel_idle: lapic_timer_reliable_states 0x2
[ 0.676323] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.676325] ACPI: Thermal Zone [TZ01] (43 C)
[ 0.676515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.677166] Linux agpgart interface v0.103
[ 0.677325] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[ 0.677326] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.677516] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 0.694179] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.694186] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.694348] mousedev: PS/2 mouse device common for all mice
[ 0.694716] rtc_cmos 00:01: RTC can wake from S4
[ 0.694981] rtc_cmos 00:01: registered as rtc0
[ 0.695009] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.695018] intel_pstate: CPU model not supported
[ 0.695049] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.695402] drop_monitor: Initializing network drop monitor service
[ 0.695669] NET: Registered protocol family 10
[ 0.711649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.713511] Segment Routing with IPv6
[ 0.713548] mip6: Mobile IPv6
[ 0.713551] NET: Registered protocol family 17
[ 0.713623] mpls_gso: MPLS GSO support
[ 0.713840] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.713860] microcode: Microcode Update Driver: v2.2.
[ 0.713865] IPI shorthand broadcast: enabled
[ 0.713875] sched_clock: Marking stable (713476643, 274500)->(1004345676, -290594533)
[ 0.713992] registered taskstats version 1
[ 0.713996] Loading compiled-in X.509 certificates
[ 0.716907] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.716947] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 0.716986] zswap: loaded using pool lzo/zbud
[ 0.717183] Key type ._fscrypt registered
[ 0.717185] Key type .fscrypt registered
[ 0.717186] Key type fscrypt-provisioning registered
[ 0.717243] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.717742] rtc_cmos 00:01: setting system clock to 2020-05-31T04:49:38 UTC (1590900578)
[ 0.720113] Freeing unused kernel image (initmem) memory: 1612K
[ 0.730915] Write protecting the kernel read-only data: 16384k
[ 0.732179] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 0.732330] Freeing unused kernel image (rodata/data gap) memory: 120K
[ 0.771771] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.771789] x86/mm: Checking user space page tables
[ 0.811462] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.811465] Run /init as init process
[ 0.811467] with arguments:
[ 0.811468] /init
[ 0.811469] noisapnp
[ 0.811470] with environment:
[ 0.811471] HOME=/
[ 0.811472] TERM=linux
[ 0.811473] BOOT_IMAGE=/boot/vmlinuz-5.6.0-2-amd64
[ 0.962694] SCSI subsystem initialized
[ 0.979718] libata version 3.00 loaded.
[ 0.986557] ahci 0000:00:1f.2: version 3.0
[ 0.986905] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.986937] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.986940] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs
[ 0.999725] scsi host0: ahci
[ 0.999967] scsi host1: ahci
[ 1.000152] scsi host2: ahci
[ 1.000330] scsi host3: ahci
[ 1.000421] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 27
[ 1.000424] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 27
[ 1.000425] ata3: DUMMY
[ 1.000427] ata4: DUMMY
[ 1.250532] random: fast init done
[ 1.316687] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[ 1.366061] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[ 1.396877] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.492679] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.494574] ata1.00: supports DRM functions and may not be fully accessible
[ 1.500471] ata1.00: NCQ Send/Recv Log not supported
[ 1.500473] ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM01B6Q, max UDMA/133
[ 1.500475] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.504993] ata1.00: supports DRM functions and may not be fully accessible
[ 1.508678] ata1.00: NCQ Send/Recv Log not supported
[ 1.512808] ata1.00: configured for UDMA/133
[ 1.523028] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.600653] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 1.600655] clocksource: 'hpet' wd_now: 3f49d046 wd_last: 11deedd mask: ffffffff
[ 1.600656] clocksource: 'tsc-early' cs_now: 220211f6de cs_last: 21b68bbb1f mask: ffffffffffffffff
[ 1.600659] tsc: Marking TSC unstable due to clocksource watchdog
[ 1.600663] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.600665] sched_clock: Marking unstable (1600388227, 274516)<-(1891257304, -290594533)
[ 1.600785] clocksource: Switched to clocksource hpet
[ 2.000723] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.003395] ata2.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100
[ 2.006312] ata2.00: configured for UDMA/100
[ 2.012399] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N 1.00 PQ: 0 ANSI: 5
[ 2.077574] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.077594] sd 0:0:0:0: [sda] Write Protect is off
[ 2.077597] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.077627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.092390] sda: sda1 sda2
[ 2.093709] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.093711] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.157235] PCLMULQDQ-NI instructions are not detected.
[ 2.275287] process '/usr/bin/fstype' started with executable stack
[ 2.550102] F2FS-fs (sda2): Found nat_bits in checkpoint
[ 2.692542] F2FS-fs (sda2): recover fsync data on readonly fs
[ 2.712698] F2FS-fs (sda2): Mounted with checkpoint version = 59b31f79
[ 2.745771] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 2.838978] systemd[1]: Inserted module 'autofs4'
[ 2.857025] systemd[1]: systemd 245.5-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.876795] systemd[1]: Detected architecture x86-64.
[ 2.893656] systemd[1]: Set hostname to <sitopanaki>.
[ 3.072467] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket â /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 3.077129] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.078330] systemd[1]: Created slice system-getty.slice.
[ 3.078426] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.078804] systemd[1]: Created slice system-modprobe.slice.
[ 3.078839] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.079161] systemd[1]: Created slice User and Session Slice.
[ 3.079286] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.079383] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.079693] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.079749] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.079804] systemd[1]: Reached target User and Group Name Lookups.
[ 3.079843] systemd[1]: Reached target Remote File Systems.
[ 3.079880] systemd[1]: Reached target Slices.
[ 3.079923] systemd[1]: Reached target Swap.
[ 3.083440] systemd[1]: Listening on Process Core Dump Socket.
[ 3.083775] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.083894] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.084312] systemd[1]: Listening on Journal Audit Socket.
[ 3.084480] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.084681] systemd[1]: Listening on Journal Socket.
[ 3.085027] systemd[1]: Listening on udev Control Socket.
[ 3.085173] systemd[1]: Listening on udev Kernel Socket.
[ 3.086982] systemd[1]: Mounting Huge Pages File System...
[ 3.089341] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.091837] systemd[1]: Mounting Kernel Debug File System...
[ 3.094599] systemd[1]: Mounting Kernel Trace File System...
[ 3.097541] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.100348] systemd[1]: Starting Load Kernel Module drm...
[ 3.105060] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.105141] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.108419] systemd[1]: Starting Journal Service...
[ 3.111568] systemd[1]: Starting Load Kernel Modules...
[ 3.113851] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.126193] systemd[1]: Starting udev Coldplug all Devices...
[ 3.130644] systemd[1]: Mounted Huge Pages File System.
[ 3.130978] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.131258] systemd[1]: Mounted Kernel Debug File System.
[ 3.131578] systemd[1]: Mounted Kernel Trace File System.
[ 3.143897] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.171574] Asymmetric key parser 'pkcs8' registered
[ 3.173991] systemd[1]: Finished Load Kernel Modules.
[ 3.174416] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 3.174541] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 3.177220] systemd[1]: Starting Apply Kernel Variables...
[ 3.190045] systemd[1]: modprobe@xxxxxxxxxxx: Succeeded.
[ 3.190873] systemd[1]: Finished Load Kernel Module drm.
[ 3.191892] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 3.192758] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 3.192852] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 3.194610] systemd[1]: Starting Load/Save Random Seed...
[ 3.196586] systemd[1]: Starting Create System Users...
[ 3.227574] systemd[1]: Finished Apply Kernel Variables.
[ 3.271062] systemd[1]: Finished Create System Users.
[ 3.272952] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.279101] systemd[1]: Finished udev Coldplug all Devices.
[ 3.295958] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.296260] systemd[1]: Reached target Local File Systems (Pre).
[ 3.296310] systemd[1]: Reached target Local File Systems.
[ 3.297976] systemd[1]: Starting Load AppArmor profiles...
[ 3.298079] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 3.300037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.394045] systemd[1]: Started udev Kernel Device Manager.
[ 3.419426] audit: type=1400 audit(1590900581.195:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=251 comm="apparmor_parser"
[ 3.448180] audit: type=1400 audit(1590900581.223:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=250 comm="apparmor_parser"
[ 3.448184] audit: type=1400 audit(1590900581.223:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=250 comm="apparmor_parser"
[ 3.448186] audit: type=1400 audit(1590900581.223:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=250 comm="apparmor_parser"
[ 3.458903] audit: type=1400 audit(1590900581.235:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=269 comm="apparmor_parser"
[ 3.458907] audit: type=1400 audit(1590900581.235:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=269 comm="apparmor_parser"
[ 3.468133] audit: type=1400 audit(1590900581.243:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=270 comm="apparmor_parser"
[ 3.468137] audit: type=1400 audit(1590900581.243:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=270 comm="apparmor_parser"
[ 3.468139] audit: type=1400 audit(1590900581.243:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=270 comm="apparmor_parser"
[ 3.518845] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input3
[ 3.518886] ACPI: Power Button [PWRB]
[ 3.518961] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input4
[ 3.518987] ACPI: Lid Switch [LID0]
[ 3.519037] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input5
[ 3.519066] ACPI: Sleep Button [SLPB]
[ 3.519199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.519317] ACPI: Power Button [PWRF]
[ 3.542075] ACPI: AC Adapter [AC] (on-line)
[ 3.542130] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found
[ 3.745293] bcma-pci-bridge 0000:04:00.0: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[ 3.745325] bcma-pci-bridge 0000:04:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 3.745349] bcma-pci-bridge 0000:04:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 3.745396] bcma-pci-bridge 0000:04:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 3.770088] bcma-pci-bridge 0000:04:00.0: bus0: Bus registered
[ 3.785786] systemd[1]: Finished Load AppArmor profiles.
[ 3.794298] pps_core: LinuxPPS API ver. 1 registered
[ 3.794300] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 3.796636] PTP clock support registered
[ 3.818834] ACPI: bus type USB registered
[ 3.818867] usbcore: registered new interface driver usbfs
[ 3.818883] usbcore: registered new interface driver hub
[ 3.818907] usbcore: registered new device driver usb
[ 3.845444] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.850729] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20200110/utaddress-204)
[ 3.850736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.850739] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200110/utaddress-204)
[ 3.850742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.850743] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20200110/utaddress-204)
[ 3.850746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.850747] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.851911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.852084] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.861235] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.862362] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.862671] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.862679] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.862691] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.862731] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000040e0
[ 3.863943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.863946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.863947] usb usb1: Product: UHCI Host Controller
[ 3.863949] usb usb1: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.863950] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.868489] ehci-pci: EHCI PCI platform driver
[ 3.868789] hub 1-0:1.0: USB hub found
[ 3.868810] hub 1-0:1.0: 2 ports detected
[ 3.871330] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 3.871339] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 3.871355] ehci-pci 0000:00:1a.7: debug port 1
[ 3.875280] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 3.875329] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd6704c00
[ 3.888695] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.888806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 3.888808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.888810] usb usb2: Product: EHCI Host Controller
[ 3.888812] usb usb2: Manufacturer: Linux 5.6.0-2-amd64 ehci_hcd
[ 3.888814] usb usb2: SerialNumber: 0000:00:1a.7
[ 3.889923] hub 2-0:1.0: USB hub found
[ 3.889939] hub 2-0:1.0: 4 ports detected
[ 3.908083] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 3.916063] tg3.c:v3.137 (May 11, 2014)
[ 3.920814] hub 1-0:1.0: USB hub found
[ 3.920828] hub 1-0:1.0: 2 ports detected
[ 3.921323] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.921333] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 3.921345] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.921379] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 3.921460] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.921462] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.921464] usb usb3: Product: UHCI Host Controller
[ 3.921465] usb usb3: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.921467] usb usb3: SerialNumber: 0000:00:1a.1
[ 3.928425] hub 3-0:1.0: USB hub found
[ 3.928437] hub 3-0:1.0: 2 ports detected
[ 3.928923] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.928932] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.928951] ehci-pci 0000:00:1d.7: debug port 1
[ 3.932867] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.932906] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6704800
[ 3.948690] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.948785] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 3.948788] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.948789] usb usb4: Product: EHCI Host Controller
[ 3.948791] usb usb4: Manufacturer: Linux 5.6.0-2-amd64 ehci_hcd
[ 3.948792] usb usb4: SerialNumber: 0000:00:1d.7
[ 3.967201] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.967205] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.967922] hub 4-0:1.0: USB hub found
[ 3.967947] hub 4-0:1.0: 8 ports detected
[ 3.968590] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.968605] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.968617] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.968645] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 3.968948] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.968951] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.968952] usb usb5: Product: UHCI Host Controller
[ 3.968954] usb usb5: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.968955] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.969215] hub 5-0:1.0: USB hub found
[ 3.969227] hub 5-0:1.0: 2 ports detected
[ 3.969673] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.969684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.969695] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.969747] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 3.969849] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.969852] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.969853] usb usb6: Product: UHCI Host Controller
[ 3.969855] usb usb6: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.969856] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.970128] hub 6-0:1.0: USB hub found
[ 3.970141] hub 6-0:1.0: 2 ports detected
[ 3.970604] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.970614] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.970622] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.970657] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00004060
[ 3.970769] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.970771] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.970772] usb usb7: Product: UHCI Host Controller
[ 3.970774] usb usb7: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.970775] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.970990] hub 7-0:1.0: USB hub found
[ 3.971002] hub 7-0:1.0: 2 ports detected
[ 3.971443] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.971453] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 3.971463] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.971498] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 3.971679] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[ 3.971681] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.971683] usb usb8: Product: UHCI Host Controller
[ 3.971684] usb usb8: Manufacturer: Linux 5.6.0-2-amd64 uhci_hcd
[ 3.971686] usb usb8: SerialNumber: 0000:00:1d.3
[ 3.979698] hub 8-0:1.0: USB hub found
[ 3.979773] hub 8-0:1.0: 2 ports detected
[ 4.032696] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.037320] libphy: tg3 mdio bus: probed
[ 4.046920] intel_powerclamp: No package C-state available
[ 4.052533] Broadcom BCM57780 500:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01, irq=POLL)
[ 4.053948] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 1c:75:08:3e:03:d0
[ 4.053951] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.053953] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.073929] intel_powerclamp: No package C-state available
[ 4.185954] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 4.186099] acer_wmi: Function bitmap for Communication Button: 0x1
[ 4.190324] input: Acer WMI hotkeys as /devices/virtual/input/input8
[ 4.191669] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.191672] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.191674] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.191676] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.191677] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.192006] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 4.192008] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.221084] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.221106] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.221377] pci 0000:00:00.0: detected 65536K stolen memory
[ 4.221407] checking generic (c0000000 300000) vs hw (d0000000 400000)
[ 4.221409] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 4.221410] fb0: switching to inteldrmfb from VESA VGA
[ 4.221549] Console: switching to colour dummy device 80x25
[ 4.221609] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 4.222200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.222202] [drm] Driver supports precise vblank timestamp query.
[ 4.222561] [drm] applying inverted panel brightness quirk
[ 4.222880] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.244397] iTCO_vendor_support: vendor-support=0
[ 4.248381] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.248465] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 4.248735] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.271100] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[ 4.272074] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 4.284859] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 4.285926] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.286050] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.286141] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.286221] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.300687] usb 4-4: new high-speed USB device number 2 using ehci-pci
[ 4.386189] tg3 0000:05:00.0 enp5s0: renamed from eth0
[ 4.402173] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 4.404088] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ 4.431887] fbcon: i915drmfb (fb0) is primary device
[ 4.463684] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 4.463822] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 4.463944] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.463998] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 4.464063] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 4.464107] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 4.489552] usb 4-4: New USB device found, idVendor=04f2, idProduct=b1d8, bcdDevice=55.63
[ 4.489554] usb 4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 4.489556] usb 4-4: Product: 1.3M WebCam
[ 4.489558] usb 4-4: Manufacturer: Sonix Technology Co., Ltd.
[ 4.494484] systemd[1]: Started Load/Save RF Kill Switch Status.
[ 4.520302] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.526732] cfg80211: Loaded X.509 cert 'benh@xxxxxxxxxx: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 4.527112] cfg80211: Loaded X.509 cert 'romain.perier@xxxxxxxxx: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 4.529422] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.531733] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 4.532271] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 4.544714] random: crng init done
[ 4.544718] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.600198] systemd[1]: Finished Load/Save Random Seed.
[ 4.600506] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 4.620685] usb 4-5: new high-speed USB device number 3 using ehci-pci
[ 4.628556] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 4.628564] b43: probe of bcma0:1 failed with error -524
[ 4.629009] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 4.666245] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 17
[ 4.667154] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.719834] systemd[1]: Started Journal Service.
[ 4.736702] systemd-journald[229]: Received client request to flush runtime journal.
[ 5.029719] usb 4-5: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[ 5.029721] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.029723] usb 4-5: Product: USB2.0-CRW
[ 5.029724] usb 4-5: Manufacturer: Generic
[ 5.029726] usb 4-5: SerialNumber: 20090516388200000
[ 5.075185] usbcore: registered new interface driver usb-storage
[ 5.079764] usbcore: registered new interface driver uas
[ 5.082700] ums-realtek 4-5:1.0: USB Mass Storage device detected
[ 5.084470] mc: Linux media interface: v0.10
[ 5.086403] scsi host4: usb-storage 4-5:1.0
[ 5.086542] usbcore: registered new interface driver ums-realtek
[ 5.115433] videodev: Linux video capture interface: v2.00
[ 5.145810] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
[ 5.162775] uvcvideo 4-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.162778] uvcvideo 4-4:1.0: Entity type for entity Processing 3 was not initialized!
[ 5.162779] uvcvideo 4-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.163127] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input14
[ 5.164351] usbcore: registered new interface driver uvcvideo
[ 5.164352] USB Video Class driver (1.1.1)
[ 5.232860] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.442398] Console: switching to colour frame buffer device 170x48
[ 5.461099] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 5.704875] Process accounting resumed
[ 5.793867] NET: Registered protocol family 38
[ 5.949702] kauditd_printk_skb: 11 callbacks suppressed
[ 5.949705] audit: type=1400 audit(1590900583.727:22): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=355 comm="cups-browsed" capability=23 capname="sys_nice"
[ 6.050312] cryptd: max_cpu_qlen set to 1000
[ 6.115507] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.117474] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.140987] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.681512] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 6.681726] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 6.736469] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 6.736531] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 7.578452] tg3 0000:05:00.0 enp5s0: Link is down
[ 7.980380] fuse: init (API version 7.31)
[ 13.065072] rfkill: input handler disabled
[ 31.881178] rfkill: input handler enabled
[ 36.044885] rfkill: input handler disabled
[ 40.862201] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[ 48.578859] rfkill: input handler enabled
[ 52.626288] rfkill: input handler disabled
[ 55.921560] perf: interrupt took too long (3157 > 3152), lowering kernel.perf_event_max_sample_rate to 63250
[ 99.931461] perf: interrupt took too long (3954 > 3946), lowering kernel.perf_event_max_sample_rate to 50500
[ 185.765281] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 185.765285] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 185.765305] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 212.385285] tg3 0000:05:00.0 enp5s0: Link is down
[ 216.481300] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 216.481304] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 329.507824] perf: interrupt took too long (4962 > 4942), lowering kernel.perf_event_max_sample_rate to 40250
[ 356.773281] tg3 0000:05:00.0 enp5s0: Link is down
[ 367.013282] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 367.013286] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 465.506124] wlan0: authenticate with d8:d7:75:69:a5:c5
[ 465.507997] wlan0: send auth to d8:d7:75:69:a5:c5 (try 1/3)
[ 465.531859] wlan0: authenticated
[ 465.532688] wlan0: associate with d8:d7:75:69:a5:c5 (try 1/3)
[ 465.538940] wlan0: RX AssocResp from d8:d7:75:69:a5:c5 (capab=0x431 status=0 aid=1)
[ 465.539491] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 465.539499] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 465.539512] wlan0: associated
[ 465.564620] wlan0: disassociated from d8:d7:75:69:a5:c5 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 465.592723] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 465.592735] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 503.201306] tg3 0000:05:00.0 enp5s0: Link is down
[ 508.325276] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 508.325280] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 544.161295] tg3 0000:05:00.0 enp5s0: Link is down
[ 576.238750] wlan0: authenticate with d8:d7:75:69:a5:c5
[ 576.238879] wlan0: send auth to d8:d7:75:69:a5:c5 (try 1/3)
[ 576.245356] wlan0: authenticated
[ 576.249191] wlan0: associate with d8:d7:75:69:a5:c5 (try 1/3)
[ 576.261170] wlan0: RX AssocResp from d8:d7:75:69:a5:c5 (capab=0x431 status=0 aid=1)
[ 576.261721] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 576.261728] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 576.261739] wlan0: associated
[ 576.287034] wlan0: disassociated from d8:d7:75:69:a5:c5 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 576.316758] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 576.316772] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 639.660031] wlan0: authenticate with d8:d7:75:69:a5:c5
[ 639.660120] wlan0: send auth to d8:d7:75:69:a5:c5 (try 1/3)
[ 639.669304] wlan0: authenticated
[ 639.672726] wlan0: associate with d8:d7:75:69:a5:c5 (try 1/3)
[ 639.677501] wlan0: RX AssocResp from d8:d7:75:69:a5:c5 (capab=0x431 status=0 aid=1)
[ 639.678075] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 639.678084] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 639.678099] wlan0: associated
[ 639.698827] wlan0: disassociated from d8:d7:75:69:a5:c5 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 639.728728] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 639.728740] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 661.925270] tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
[ 661.925274] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[ 661.925297] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 842.894272] atkbd serio0: Unknown key pressed (translated set 2, code 0x93 on isa0060/serio0).
[ 842.894277] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
[ 842.903739] atkbd serio0: Unknown key released (translated set 2, code 0x93 on isa0060/serio0).
[ 842.903743] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
[ 1537.445281] tg3 0000:05:00.0 enp5s0: Link is down
[ 1595.795162] atkbd serio0: Unknown key pressed (translated set 2, code 0x93 on isa0060/serio0).
[ 1595.795167] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
[ 1595.801375] atkbd serio0: Unknown key released (translated set 2, code 0x93 on isa0060/serio0).
[ 1595.801380] atkbd serio0: Use 'setkeycodes e013 <keycode>' to make it known.
[ 1599.049169] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1599.049184] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)