[PATCH 3/9] net: wireless: ath: fix wiki website url

From: Flavio Suligoi
Date: Fri Jun 05 2020 - 11:42:01 EST


In some ath files, the wiki url is still the old
"wireless.kernel.org" instead of the new
"wireless.wiki.kernel.org"

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
---
drivers/net/wireless/ath/Kconfig | 4 ++--
drivers/net/wireless/ath/ath9k/Kconfig | 5 +++--
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
drivers/net/wireless/ath/carl9170/Kconfig | 2 +-
drivers/net/wireless/ath/carl9170/usb.c | 2 +-
drivers/net/wireless/ath/wil6210/Kconfig | 2 +-
6 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index b10972b6cba4..0138d415f4e1 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -15,11 +15,11 @@ config WLAN_VENDOR_ATH

For more information and documentation on this module you can visit:

- http://wireless.kernel.org/en/users/Drivers/ath
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath

For information on all Atheros wireless drivers visit:

- http://wireless.kernel.org/en/users/Drivers/Atheros
+ https://wireless.wiki.kernel.org/en/users/Drivers/Atheros

if WLAN_VENDOR_ATH

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 78620c6b64a2..28b46ca9ee3b 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -34,7 +34,7 @@ config ATH9K
APs that come with these cards refer to ath9k wiki
products page:

- http://wireless.kernel.org/en/users/Drivers/ath9k/products
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products

If you choose to build a module, it'll be called ath9k.

@@ -185,7 +185,8 @@ config ATH9K_HTC
Support for Atheros HTC based cards.
Chipsets supported: AR9271

- For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
+ For more information:
+ https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc

The built module will be ath9k_htc.

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 052deffb4c9d..8c97db73e34c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2410,7 +2410,7 @@ static u8 fixup_chainmask(u8 chip_chainmask, u8 eeprom_chainmask)
* of tests. The testing requirements are going to be documented. Desired
* test requirements are documented at:
*
- * http://wireless.kernel.org/en/users/Drivers/ath9k/dfs
+ * https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/dfs
*
* Once a new chipset gets properly tested an individual commit can be used
* to document the testing for DFS for that chipset.
diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig
index b1bce7aad399..b2d760873992 100644
--- a/drivers/net/wireless/ath/carl9170/Kconfig
+++ b/drivers/net/wireless/ath/carl9170/Kconfig
@@ -10,7 +10,7 @@ config CARL9170

It needs a special firmware (carl9170-1.fw), which can be downloaded
from our wiki here:
- <http://wireless.kernel.org/en/users/Drivers/carl9170>
+ <https://wireless.wiki.kernel.org/en/users/Drivers/carl9170>

If you choose to build a module, it'll be called carl9170.

diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index 486957a04bd1..ead79335823a 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -61,7 +61,7 @@ MODULE_ALIAS("arusb_lnx");
* Note:
*
* Always update our wiki's device list (located at:
- * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
+ * https://wireless.wiki.kernel.org/en/users/Drivers/ar9170/devices ),
* whenever you add a new device.
*/
static const struct usb_device_id carl9170_usb_ids[] = {
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 0d1a8dab30ed..8c9dd673b9e7 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -10,7 +10,7 @@ config WIL6210
wil6210 chip by Wilocity. It supports operation on the
60 GHz band, covered by the IEEE802.11ad standard.

- http://wireless.kernel.org/en/users/Drivers/wil6210
+ https://wireless.wiki.kernel.org/en/users/Drivers/wil6210

If you choose to build it as a module, it will be called
wil6210
--
2.17.1