Re: [PATCH v6 8/8] ima: add FIRMWARE_PARTIAL_READ support

[Mimi Zohar]

On Fri, 2020-06-05 at 16:31 -0700, Scott Branden wrote:
> Hi Mimi,
> 
> On 2020-06-05 4:19 p.m., Mimi Zohar wrote:
> > Hi Scott,
> >
> > On Fri, 2020-06-05 at 15:59 -0700, Scott Branden wrote:
> >> @@ -648,6 +667,9 @@ int ima_post_read_file(struct file *file, void *buf, loff_t size,
> >>   	enum ima_hooks func;
> >>   	u32 secid;
> >>   
> >> +	if (!file && read_id == READING_FIRMWARE_PARTIAL_READ)
> >> +		return 0;
> > The file should be measured on the pre security hook, not here on the
> > post security hook. ÂHere, whether "file" is defined or not, is
> > irrelevant. ÂThe test should just check "read_id".
> OK, will remove the !file from here.

thanks!

> >
> > Have you tested measuring the firmware by booting a system with
> > "ima_policy=tcb" specified on the boot command line and compared the
> > measurement entry in the IMA measurement list with the file hash (eg.
> > sha1sum, sha256sum)?
> Yes, I enabled IMA in my kernel and added ima_policy=tsb to the boot 
> command line,
> 
> Here are the entries from 
> /sys/kernel/security/ima/ascii_runtime_measurements of the files I am 
> accessing.
> Please let me know if I am doing anything incorrectly.
> 
> 10 4612bce355b2dbc45ecd95e17001636be8832c7f ima-ng 
> sha1:fddd9a28c2b15acf3b0fc9ec0cf187cb2153d7f2 
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
> 10 4c0eb0fc30eb7ac3a30a27f05c1d2a8d28d6a9ec ima-ng 
> sha1:b16d343dd63352d10309690c71b110762a9444c3 
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsn
> 
> The sha1 sum matches:
> root@genericx86-64:/sys/kernel/security/ima# sha1sum 
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
> fddd9a28c2b15acf3b0fc9ec0cf187cb2153d7f2 
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
> 
> root@genericx86-64:/sys/kernel/security/ima# sha1sum 
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsa.bin
> b16d343dd63352d10309690c71b110762a9444c3 
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsa.bin

Looks good!

(FYI, a larger hash algorithm can be specified in the Kconfig or
"ima_hash=" on the boot command line.)

Mimi