Re: [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs
From: Russell King - ARM Linux admin
Date: Fri Jun 05 2020 - 19:54:17 EST
On Sat, Feb 29, 2020 at 11:04:56AM +0000, Russell King - ARM Linux admin wrote:
> Adding Ted and Andreas...
>
> Here's the debugfs -n "id" output for dpkg.status.5.gz (which is fine,
> and probably a similar size):
>
> debugfs: id <917527>
> 0000 a481 0000 30ff 0300 bd8e 475e bd77 4f5e ....0.....G^.wO^
> 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> 0060 0000 0000 0000 0000 4000 0000 8087 3800 ........@.....8.
> 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
> 0140 0000 0000 c40b 4c0a 0000 0000 0000 0000 ......L.........
> 0160 0000 0000 0000 0000 0000 0000 3884 0000 ............8...
> 0200 2000 95f2 44b8 bdc9 a4d2 9883 c861 dc92 ...D........a..
> 0220 bd31 4a5e ecc5 260c 0000 0000 0000 0000 .1J^..&.........
> 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
>
> and for the affected inode:
> debugfs: id <917524>
> 0000 a481 0000 30ff 0300 3d3d 465e bd77 4f5e ....0...==F^.wO^
> 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> 0060 0000 0000 0000 0000 4000 0000 c088 3800 ........@.....8.
> 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
> 0140 0000 0000 5fc4 cfb4 0000 0000 0000 0000 ...._...........
> 0160 0000 0000 0000 0000 0000 0000 af23 0000 .............#..
> 0200 2000 1cc3 ac95 c9c8 a4d2 9883 583e addf ...........X>..
> 0220 3de0 485e b04d 7151 0000 0000 0000 0000 =.H^.MqQ........
> 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
>
> and "stat" output:
> debugfs: stat <917527>
> Inode: 917527 Type: regular Mode: 0644 Flags: 0x80000
> Generation: 172755908 Version: 0x00000000:00000001
> User: 0 Group: 0 Project: 0 Size: 261936
> File ACL: 0
> Links: 1 Blockcount: 512
> Fragment: Address: 0 Number: 0 Size: 0
> ctime: 0x5e4f77bd:c9bdb844 -- Fri Feb 21 06:25:01 2020
> atime: 0x5e478ebd:92dc61c8 -- Sat Feb 15 06:25:01 2020
> mtime: 0x5e34ca29:8398d2a4 -- Sat Feb 1 00:45:29 2020
> crtime: 0x5e4a31bd:0c26c5ec -- Mon Feb 17 06:25:01 2020
> Size of extra inode fields: 32
> Inode checksum: 0xf2958438
> EXTENTS:
> (0-63):3704704-3704767
> debugfs: stat <917524>
> Inode: 917524 Type: regular Mode: 0644 Flags: 0x80000
> Generation: 3033515103 Version: 0x00000000:00000001
> User: 0 Group: 0 Project: 0 Size: 261936
> File ACL: 0
> Links: 1 Blockcount: 512
> Fragment: Address: 0 Number: 0 Size: 0
> ctime: 0x5e4f77bd:c8c995ac -- Fri Feb 21 06:25:01 2020
> atime: 0x5e463d3d:dfad3e58 -- Fri Feb 14 06:25:01 2020
> mtime: 0x5e34ca29:8398d2a4 -- Sat Feb 1 00:45:29 2020
> crtime: 0x5e48e03d:51714db0 -- Sun Feb 16 06:25:01 2020
> Size of extra inode fields: 32
> Inode checksum: 0xc31c23af
> EXTENTS:
> (0-63):3705024-3705087
>
> When using sif (set_inode_info) to re-set the UID to 0 on this (so
> provoke the checksum to be updated):
>
> debugfs: id <917524>
> 0000 a481 0000 30ff 0300 3d3d 465e bd77 4f5e ....0...==F^.wO^
> 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> 0060 0000 0000 0000 0000 4000 0000 c088 3800 ........@.....8.
> 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
> 0140 0000 0000 5fc4 cfb4 0000 0000 0000 0000 ...._...........
> 0160 0000 0000 0000 0000 0000 0000 b61f 0000 ................
> ^^^^
> 0200 2000 aa15 ac95 c9c8 a4d2 9883 583e addf ...........X>..
> ^^^^
> 0220 3de0 485e b04d 7151 0000 0000 0000 0000 =.H^.MqQ........
> 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> *
>
> The values with "^^^^" are the checksum, which are the only values
> that have changed here - the checksum is now 0x15aa1fb6 rather than
> 0xc31c23af.
>
> With that changed, running e2fsck -n on the filesystem results in a
> pass:
>
> root@cex7:~# e2fsck -n /dev/nvme0n1p2
> e2fsck 1.44.5 (15-Dec-2018)
> Warning: skipping journal recovery because doing a read-only filesystem check.
> /dev/nvme0n1p2 contains a file system with errors, check forced.
> Pass 1: Checking inodes, blocks, and sizes
> Pass 2: Checking directory structure
> Pass 3: Checking directory connectivity
> Pass 4: Checking reference counts
> Pass 5: Checking group summary information
> /dev/nvme0n1p2: 121163/2097152 files (0.1% non-contiguous), 1349227/8388608 blocks
>
> and the file now appears to be intact (being a gzip file, gzip verifies
> that the contents are now as it expects.)
>
> So, it looks like the _only_ issue is that the checksum on the inode
> became invalid, which seems to suggest that it *isn't* a NVMe nor PCIe
> issue.
>
> I wonder whether the journal would contain anything useful, but I don't
> know how to use debugfs to find that out - while I can dump the journal,
> I'd need to know which block contains the inode, and then work out where
> in the journal that block was going to be written. If that would help,
> let me know ASAP as I'll hold off rebooting the platform for a while
> (which means the filesystem will remain as-is - and yes, I have the
> debugfs file for e2undo to put stuff back.) Maybe it's possible to pull
> the block number out of the e2undo file?
>
> tune2fs says:
>
> Checksum type: crc32c
> Checksum: 0x682f91b9
>
> I guess this is what is used to checksum the inodes? If so, it's using
> the kernel's crc32c-generic driver (according to /proc/crypto).
>
> Could it be a race condition, or some problem that's specific to the
> ARM64 kernel that's provoking this corruption?
Hi,
The corruption has returned this evening:
[25094.614718] EXT4-fs error (device nvme0n1p2): ext4_lookup:1707: inode #271688: comm mandb: iget: checksum invalid
[25094.623781] Aborting journal on device nvme0n1p2-8.
[25094.627419] EXT4-fs (nvme0n1p2): Remounting filesystem read-only
[25094.628206] EXT4-fs error (device nvme0n1p2):
ext4_journal_check_start:83: Detected aborted journal
root@cex7:[~]:<506> debugfs /dev/nvme0n1p2
debugfs 1.44.5 (15-Dec-2018)
debugfs: id <271688>
0000 a481 0000 f108 0000 2518 fd5d 2518 fd5d ........%..]%..]
0020 9f49 715c 0000 0000 0000 0100 0800 0000 .Iq\............
0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
0060 0000 0000 0000 0000 0100 0000 ed19 1100 ................
0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
*
0140 0000 0000 b42f 4f06 0000 0000 0000 0000 ...../O.........
0160 0000 0000 0000 0000 0000 0000 c9cf 0000 ................
0200 2000 8d83 086d bebf 0000 0000 086d bebf ....m.......m..
0220 2518 fd5d 086d bebf 0000 0000 0000 0000 %..].m..........
0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
*
debugfs: stat <271688>
Inode: 271688 Type: regular Mode: 0644 Flags: 0x80000
Generation: 105852852 Version: 0x00000000:00000001
User: 0 Group: 0 Project: 0 Size: 2289
File ACL: 0
Links: 1 Blockcount: 8
Fragment: Address: 0 Number: 0 Size: 0
ctime: 0x5dfd1825:bfbe6d08 -- Fri Dec 20 18:51:17 2019
atime: 0x5dfd1825:bfbe6d08 -- Fri Dec 20 18:51:17 2019
mtime: 0x5c71499f:00000000 -- Sat Feb 23 13:24:47 2019
crtime: 0x5dfd1825:bfbe6d08 -- Fri Dec 20 18:51:17 2019
Size of extra inode fields: 32
Inode checksum: 0x838dcfc9
EXTENTS:
(0):1120749
debugfs:
root@cex7:[~]:<509> e2fsck -n /dev/nvme0n1p2
e2fsck 1.44.5 (15-Dec-2018)
Warning: skipping journal recovery because doing a read-only filesystem check.
/dev/nvme0n1p2 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/nvme0n1p2: 147476/2097152 files (0.1% non-contiguous), 1542719/8388608 blocks
This time, the machine has not been powered down for a very long time,
although I've booted 5.7 (plus the additional patches including several
workarounds in the PCIe driver so my Mellanox card works) on it earlier
today. I did notice that debian decided to run a fsck on the filesystem
at reboot, which is a little weird as it's ext4, and found nothing wrong.
Hmm, I just tried:
root@cex7:[~]:<514> hdparm -f /dev/nvme0n1p2
root@cex7:[~]:<515> hdparm -f /dev/nvme0n1
root@cex7:[~]:<517> e2fsck -n /dev/nvme0n1p2
e2fsck 1.44.5 (15-Dec-2018)
Warning: skipping journal recovery because doing a read-only filesystem
check.
/dev/nvme0n1p2 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry 'mainlog.2.gz' in /var/log/exim4 (917613) has deleted/unused inode 922603. Clear? no
Entry 'mainlog.2.gz' in /var/log/exim4 (917613) has an incorrect filetype (was 1, should be 0).
Fix? no
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Unattached inode 920748
Connect to /lost+found? no
Pass 5: Checking group summary information
Block bitmap differences: +(9259--9280) -3703011 -3703044 -3703053 +3736187 -3827722 -3830272 +3906363 +3911697 +3911699 +3911701 +3911703 +3913228
Fix? no
Free blocks count wrong for group #113 (12615, counted=12606).
Fix? no
Free blocks count wrong (6845889, counted=6845880).
Fix? no
Inode bitmap differences: Group 112 inode bitmap does not match checksum.
IGNORED.
Block bitmap differences: Group 113 block bitmap does not match checksum.
IGNORED.
/dev/nvme0n1p2: ********** WARNING: Filesystem still has errors **********
/dev/nvme0n1p2: 147476/2097152 files (0.1% non-contiguous), 1542719/8388608 blocks
which looks less good, and is likely to be e2fsck reading off the media
rather than using what was in the kernel cache. However, still nothing
for the offending inode, who's raw data remains unchanged from what I've
quoted above from debugfs.
It /seems/ to be pointing at the data on the media changing, possibly
buggy firmware on the nvme (ADATA SX8200PNP) drive, maybe? Or maybe
undiscovered bugs in the Mobiveil PCIe hardware corrupting transfers
to the nvme?
The problem is, this is rather undebuggable as it happens so rarely. :(
I'm becoming very discouraged to touch nvme ever again by this, as this
is my first and only experience of that technology. I'm considering
getting some conventional SATA HDDs and junking nvme on the basis of
it being an unreliable technology.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 424kbps up