Re: [PATCH v2] x86/mm: use max memory block size on bare metal

[David Hildenbrand]

On 10.06.20 09:20, David Hildenbrand wrote:
> On 10.06.20 00:54, Daniel Jordan wrote:
>> Some of our servers spend significant time at kernel boot initializing
>> memory block sysfs directories and then creating symlinks between them
>> and the corresponding nodes.  The slowness happens because the machines
>> get stuck with the smallest supported memory block size on x86 (128M),
>> which results in 16,288 directories to cover the 2T of installed RAM.
>> The search for each memory block is noticeable even with
>> commit 4fb6eabf1037 ("drivers/base/memory.c: cache memory blocks in
>> xarray to accelerate lookup").
>>
>> Commit 078eb6aa50dc ("x86/mm/memory_hotplug: determine block size based
>> on the end of boot memory") chooses the block size based on alignment
>> with memory end.  That addresses hotplug failures in qemu guests, but
>> for bare metal systems whose memory end isn't aligned to even the
>> smallest size, it leaves them at 128M.
>>
>> Make kernels that aren't running on a hypervisor use the largest
>> supported size (2G) to minimize overhead on big machines.  Kernel boot
>> goes 7% faster on the aforementioned servers, shaving off half a second.
>>
>> Signed-off-by: Daniel Jordan <daniel.m.jordan@xxxxxxxxxx>
>> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Andy Lutomirski <luto@xxxxxxxxxx>
>> Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
>> Cc: David Hildenbrand <david@xxxxxxxxxx>
>> Cc: Michal Hocko <mhocko@xxxxxxxxxx>
>> Cc: Pavel Tatashin <pasha.tatashin@xxxxxxxxxx>
>> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>> Cc: Steven Sistare <steven.sistare@xxxxxxxxxx>
>> Cc: linux-mm@xxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> ---
>>
>> Applies to 5.7 and today's mainline
>>
>>  arch/x86/mm/init_64.c | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
>> index 8b5f73f5e207c..906fbdb060748 100644
>> --- a/arch/x86/mm/init_64.c
>> +++ b/arch/x86/mm/init_64.c
>> @@ -55,6 +55,7 @@
>>  #include <asm/uv/uv.h>
>>  #include <asm/setup.h>
>>  #include <asm/ftrace.h>
>> +#include <asm/hypervisor.h>
>>  
>>  #include "mm_internal.h"
>>  
>> @@ -1390,6 +1391,15 @@ static unsigned long probe_memory_block_size(void)
>>  		goto done;
>>  	}
>>  
>> +	/*
>> +	 * Use max block size to minimize overhead on bare metal, where
>> +	 * alignment for memory hotplug isn't a concern.
>> +	 */
>> +	if (hypervisor_is_type(X86_HYPER_NATIVE)) {
>> +		bz = MAX_BLOCK_SIZE;
>> +		goto done;
>> +	}
> 
> I'd assume that bioses on physical machines >= 64GB will not align
> bigger (>= 2GB) DIMMs to something < 2GB.
> 
> Acked-by: David Hildenbrand <david@xxxxxxxxxx>

FTWT, setup_arch() does the init_hypervisor_platform() call. I assume
that should be early enough.

We should really look into factoring out memory_block_size_bytes() into
common code, turning into a simple global variable read. Then, we should
provide an interface to configure the memory block size during boot from
arch code (set_memory_block_size()).

-- 
Thanks,

David / dhildenb